Front Hitch and Wiring Kit for Winch for 2021 Jeep Wrangler Unlimited

Question

Question:

2021 Jeep Wrangler JLU Rubicon. Looking for a non-obtrusive front mount hitch receiver. Also applicable wiring harness. End goal is to be able to move portable winch from rear to front of jeep or vice a versa. Thanks!

asked by: Anna

0

Expert Reply:

The Curt hitch part # C31086 is probably the most unobtrusive front hitch that fits your 2021 Jeep Wrangler Unlimited.

For a 4 foot wiring kit the part # BDW20305 would work great too.

expert reply by: Jameson C

0

Answer 1

Hey Dave, In my opinion the etrailer Invisible Base Plate Kit #e98948 is going to be the stronger option compared to the Blue Ox Base Plate Kit #BLU53FR. Blue Ox started adding safety cables to their baseplate kits as a last resort backup in the…

view full answer...

Answer 2

Hi Dave, The etrailer Invisible Base Plate Kit #e98948 and Blue Ox Base Plate Kit #BLU53FR are designed slightly different, but both are compatible fits for your 2023 Jeep Gladiator. The #e98948 is going to be an easier installation since you…

view full answer...

Answer 3

The etrailer base plate kit part #e98948 is perfectly compatible with a Blue Ox Alpha tow bar but it does not come with braking or lighting. For lighting you can use the diode kit, #RM-15267, and not have to worry about cutting into the taillight…

view full answer...

Answer 4

The etrailer Invisible Base Plate Kit part #e98948 is an excellent option for a 2019 Jeep Wrangler. The attachment methods can vary from manufacturer to manufacturer but each will be plenty suitable for flat-towing and I couldn't accurately say…

view full answer...

Answer 5

The Smittybilt XRC Gen2 bumper on the 2020 Jeep Wrangler has 3/4" thick d-rings so you can use the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars part #RM-035 to tow with the D-rings on your bumper. Smittybilt is…

view full answer...

Answer 6

For your 2022 Jeep Wrangler, the twist locks (the base plate tabs) will indeed connect to the end of the arms on the etrailer SD Non-Binding Tow Bar #e34ZR. You'll connect that directly to the Invisible Base Plate Kit #e98948. It's somewhat…

view full answer...

Answer 7

For your 2021 Jeep Wrangler Sahara Unlimited you can use either the etrailer Base Plate #e98948 or the Demco #DM9519336 as long as you have the factory plastic bumper and you will be able to use reuse your existing Blue Ox Aventa II without needing…

view full answer...

Answer 8

I attached a picture of the wiring diagram for the Demco SBS Stay In Play Duo part #SM99251 that you referenced.

view full answer...

Answer 9

The reason you can't use the stop light circuit of the trailer wiring on your motorhome is because that circuit also carries the blinker signal. You have to find a dedicated stoplight circuit and that is why the install instructions recommend you…

view full answer...

Answer 10

The monitor light included in the SMI Stay-IN-Play DUO Supplemental Braking System part #SM99251 will illuminate when the vehicle is not in tow if power to the controller is still active. You will need to cut power to the controller via the toggle…

view full answer...

Answer 11

The SMI Stay-IN-Play DUO Supplemental Braking System part #SM99251 is compatible with your 2016 Cadillac SRX. However, as you mentioned the stop light circuit on this vehicle will go dead while in tow mode. Therefore, in order to power the monitor…

view full answer...

Answer 12

The stop light switch on a 2021 Jeep Wrangler Unlimited is not active while in tow so you can either hook the signal wire up from the Demco Stay-IN-Play DUO Supplemental Braking System part #DM86VR to the breakaway as instructed in the install manual…

view full answer...