What Roof Rack and Kayak Carrier Do You Recommend for a 2015 Mazda CX-9 for 3 Kayaks?

Question

Question:

My 2015 Mazda CX-9 has no roof rack whatsoever yet - Id like to have my body shop install factory raised rails for me but would like to get the right/best rack and crossbars so that I could load 3 kayaks on the roof with this product - what should I request? Also Id like a rack thats permanently installed so that I take stuff on and off as little as possible- I kayak just half hour from my home frequently and want this quick and be able to leave it on while I drive around town at other times. thank you!!

asked by: Andriana L

0

Expert Reply:

For a complete roof rack system for your 2015 Mazda CX-9 with factory raised rails, I recommend the following parts:

- Rhino-Rack Vortex Aero Crossbars # RRVA126B-2
- Rhino-Rack SX Series Legs for Vortex Aero Crossbars - Raised Factory Side Rails - Qty 4 # RRSX100

As far as a kayak carrier that can hold 3 kayaks that can be left installed on your vehicle when not transporting your kayaks, I recommend the Rhino-Rack Nautic Stack Kayak Carrier w/ Tie-Downs - Post Style - Folding - 4 Kayaks # RRS520. I confirmed with Rhino-Rack that the Nautic Stack can stay mounted on your vehicle unless if you go through a car wash. Th Nautic Stack comes with the 2 tie-down straps with cam buckles as well as 2 bow/stern ties. For your third Kayak, you will need two sets of the Rhino-Rack Cam Buckle Cinch Straps - 15/16" x 18' - 165 lbs - Qty 2 # RRRTD55P as well as a Rhino-Rack Vehicle Strap Anchors for Bow/Stern Tie-Downs - Qty 2 # RRRAS.

expert reply by: Bob C

0

Answer 1

I recommend going with the Rhino-Rack 2 Kayak Carrier w/ Tie-Downs #S512-S512X. This can hold 1 or 2 kayaks and will take up much less room than using 2 individual kayak carriers, so you will have more spare room on your roof rack for other…

view full answer...

Answer 2

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

Thanks for reaching out to verify, Frank! Yes, those parts (listed below) will fit great together and on your 2010 Honda Accord Crosstour with the naked roof. Inno Roof Rack - Aero Crossbars #INXB130-138 - Through Feet #INXS250 - Fit Kit #INK587 The…

view full answer...

Answer 7

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 8

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 9

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 10

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 11

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

view full answer...

Answer 12

There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars #INXB100-108, Flush Feet for Aero Crossbars #INXS200, and Custom Fit Kit #INK482. This rack has a 100 lbs…

view full answer...

What Roof Rack and Kayak Carrier Do You Recommend for a 2015 Mazda CX-9 for 3 Kayaks?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching