Determining Which Braking Assemblies And Bearings Fit Dexter P-15 Model SLR Axles On Cattle Trailer
Question:
I have a cattle trailer with Dexter axles P-15 MODEL # SLR that I need bearings and brakes for. what are the numbers I need .
asked by: Tommy R
Expert Reply:
I would be happy to help you find the correct replacement brakes and bearings for the Dexter P-15 Model SLR axles on your cattle trailer, but unfortunately that is not enough information for me to identify the axle.
The easiest way is going to be to take a picture of the axle tag with the serial number and send it in. With the serial number I will be able to confirm which bearing combination and brakes your axles use.
If the serial number is no longer readable you will need to remove one of your hubs and look for the bearing numbers stamped in the face of each bearing as shown in the included picture of the # L44649.
If the bearings are worn to the point that you cannot read the bearing numbers then you will need to use digital calipers like # PTW80157 to precisely measure your spindle in the locations shown in the included diagram.
Lastly to identify the correct braking assemblies you will need to measure the inside diameter and depth of your current hubs as shown in the included diagram.
With the above information I would be happy to confirm the parts you need for your trailer.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Dexter Trailer Axle w/ Electric Brakes - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Search Results: weld on spindle
- Search Results: #84 hub
- Shop: Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 72" Long - 2,200 lbs
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-3/4 - Pre-Greased
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 5,200 lbs
- Shop: etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Article: Trailer Wiring Diagrams
- Search Results: 25580
- Shop: Trailer Hitch
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Search Results: fender
- Article: Most Popular Wheel Bearings
- Video: Choosing the Right Trailer Wiring
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Brake Controller
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Search Results: equalizer
- Article: Trailer Tire Sizing
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Search Results: leaf spring
- Shop: Grease Seals 10-36 (pair)
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Suspension Enhancement
- Search Results: trailer jack
- Video: Choosing the Right Brake Controller
- Q&A: How to Determine Weight Capacity of Trailer Axle