Will Dexter E-Z Flex Suspension Kit Work To Replace the Equa-Flex Cushioned Equalizers

Question

Question:

I am considering replacing the Equa-Flex system on our 2016 Fox Mtn 235rls, with the Dexter K7-652-00 equalizer and wet bolts. Will this fit? Will it affect axle alignment?

asked by: Don T

0

Expert Reply:

The Dexter E-Z Flex Suspension Kit part # K71-652-00 will be a direct replacement for the Equa-Flex Cushioned Equalizers part # LC279687 (5-1/2"). If you have the larger Equa-Flex Cushioned Equalizers part # LC279688 (7-1/2") however then you will need the Dexter E-Z Flex Suspension Kit part # K71-653-00.

In order to be sure you choose the correct Dexter E-Z Flex Suspension Kit you will need to measure the Equa-Flex Cushioned Equalizers you have now.

expert reply by: Conner L

0

Answer 1

I think your measurements are a little off because the equalizer is worn and compressed. What you have there is definitely the Equa-Flex #LC279687. This is going to be the best option for a replacement since it is what came on your trailer. Using…

view full answer...

Answer 2

The Bestop X-Large Tire Cover #B6103135 would work perfectly for your 255/75R17 as it will fit tires up to 31 inches in height and yours is 30-1/4 inches.

view full answer...

Answer 3

We have an EquaFlex wet bolt kit with the part #LC64FR which comes with new wet bolts, shackles, and nuts. The shackles are 3-1/8 inches like you mentioned wanting. Then for replacement bushings you'd want the part #LC32SV. These are available.…

view full answer...

Answer 4

The distance from the center of the uppermost bolt hole where it attaches to the leaf spring hanger to the center of the two bolt holes which attach to the left springs on the Equa-Flex Cushioned Equalizers part #LC279688 is 4". If this distance…

view full answer...

Answer 5

Since you are going with a slightly bigger equalizer, the Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 6K to 8K, part #LC279688, you will go with a smaller shackle strap. The MORryde Suspension Upgrade Kit for Tandem Axle…

view full answer...

Answer 6

If you would like to add the Equa-Flex to your 2010 Keystone Cougar you will need the #LC279687. The #LC279688 is designed for 6,000-8,000 lb axles so it would be overrated for your trailer. The #LC279687 is for 3,000-6,000 lb axles. You will want to…

view full answer...

Answer 7

I do have a couple options for you as the Equa-Flex Cushioned Equalizers #LC279688 are only recommended from Lippert to work with 6,000-8,000lb axles. I recommend the Dexter E-Z Flex Suspension Kit #K71-653-00 on your 2021 Grand Design Imagine 2910BH…

view full answer...

Answer 8

Your drawing picture with the dimensions of your equalizer did not make it through but since I can identify the equalizer you have as the part #TREQE1 from the picture that did make it through the best cushioned equalizer we offer that will be a…

view full answer...

Answer 9

The MORryde Shackle Upgrade Kit for Tandem Axle Trailers w/ 2-1/4" Shackles & Correct Track #MR58ZR you were looking at may work on your 2018 Highland Ridge Travel Trailer 322RL with Lippert 5200LB axles and the correct track alignment/lift…

view full answer...

Answer 10

While I can't for sure promise that the Suspension Shackle Kit part #MR46ZR fits your Arctic Fox I would be willing to bet a large amount of money that it would since you have the standard 1-3/4 inch wide springs which are basically always 9/16…

view full answer...

Answer 11

So I can help you determine which are the correct cushioned Equa-Flex cushioned equalizers are for your 2019 Vanleigh Pinecrest, though this will require you to take a measurement. The reason for that is because there is no such thing as a list of…

view full answer...

Answer 12

Since your F-250 has the short bed you are going to want to go with a sliding hitch like the B&W Companion item #BWRVK3370. The Companion will give you 12" of travel for making tight turns and backing. A Reese Goosebox will have a comparable…

view full answer...