Recommended Black 13" Trailer Wheels with 5 Bolt Pattern

Question

Question:

I need this 13inch wheel in black PVD finish to match my 15inch black PVD I bought from you. You offer it in a silver PVD, can you get the black?

asked by: Michael

0

Expert Reply:

We currently offer a few different black wheel options with 13" diameter and 5 on 4-1/2" bolt pattern, the Dexstar Conventional Steel Wheel part # AM20214 and Dexstar Steel Mini Mod Trailer Wheel part # AM20245. The finish however is powder coat. I like the Dexstar Conventional because it can be used with the Americana Baby Moon Trailer Wheel Center Cap part # AM90086.

expert reply by: Conner L

0

Answer 1

We offer trailer wheels, and some wheels with tires already mounted, in several 5-lug bolt patterns: 5 on 4-1/2 Inch 5 on 4-3/4 Inch 5 on 5 Inch 5 on 5-1/2 Inch By far the most common bolt pattern is the 5-on-4-1/2. This means that the 5 lugs are…

view full answer...

Answer 2

The HWT Aluminum Hi-Spec Series S5 Trailer Wheel #AM22323HWTB referenced in your questions will use lug nuts like the CE Smith #CE11051. These are designed for 1/2 inch wheel studs and feature a machined steel construction to resist rust and…

view full answer...

Answer 3

Modular wheels like the Dexstar Steel Mini Mod Trailer Wheel - 13" x 4-1/2" Rim - 5 on 4-1/2 - Black #AM20245 will have more visual appeal and have spokes or holes in the wheel surface where a conventional wheel like the #AM20214 won't…

view full answer...

Answer 4

Currently the Karrier ST175/80R13 Radial Trailer Tire #AM10210 is the only 175/80R13 Load Range D tire we carry. The Karrier ST175/80R13 Radial Trailer Tire with 13" Aluminum Wheel #KE53JR is the only wheel and tire combo we have that has this…

view full answer...

Answer 5

There are two different types of trailer hubs that will determine if the pilot hole on a wheel matters or not. First there are hubs that use wheel bolts to secure the wheel to the hub. These are called hub-centric. For this type, the pilot hole has…

view full answer...

Answer 6

If the tires you installed are of the proper size and load rating, you should be fine. Each tire should have the load rating listed on it. The combined load rating of all 4 tires should equal or exceed the combined weight of the boat and trailer.…

view full answer...

Answer 7

There are a couple of things to look at before ordering tires and wheels for your vintage boat trailer. You mentioned the pilot hole (center hole) is 2.54 inches diameter. This could be important depending on how the wheel mounts to the hub. If it…

view full answer...

Answer 8

The 5 on 4 3/4 bolt pattern is starting to get less and less common, so they are getting a little difficult to find. With that being said, this bolt pattern was generally not used on wheels of this size in the trailer world. If you take a look at the…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 12

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...