Front HappiJac Camper Tie Down With Stabilizer Bar For A 2016 Chevrolet Siverado 2500

Question

Question:

Do you have Happijack Front Tie Down system w/ stabilizer bar that fits a 2016 2500 Chevy Silverado?

asked by: Tanya H

0

Expert Reply:

The HappiJac Truck-Mounted Camper Tie-Downs Item # LC350763-182971 is designed to be used for the front or rear on your 2016 Chevrolet Silverado 2500 and includes the stabilizer bar as requested.

expert reply by: Shane H

0

Answer 1

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 2

The TorkLift options for your truck are the #TLC2220 for the front and #TLC3215 as long as your steps do not run under the bed. If they end at the cab, then these will work. If they do run under the bed, then instead you will want the HappiJac Custom…

view full answer...

Answer 3

Great question! I've attached part of the installation instructions that show how to install the rear part of the HappiJac Custom Tie-Downs #LC350763-182971 on the step bumper for your 2016 GMC Sierra 1500.

view full answer...

Answer 4

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 5

What is your bed length? What hitch do you have at rear of truck? Do you have running boards?

view full answer...

Answer 6

For your 2016 GMC Sierra 6-1/2 Foot Bed - Crew Cab - with board or step underneath truck bed and with a factory installed hitch the 2500 Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 Item #HSAB with the Brophy Basic…

view full answer...

Answer 7

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 8

Since the issue appears to be on the vehicle side for your 2017 Toyota Tacoma, I recommend first checking the connector itself. Look to see if there is any dirt or corrosion built up inside the connector that may preventing a solid connection with…

view full answer...

Answer 9

I spoke to my contact at Horizon Global. He said it is acceptable to mount the Bulldog Powered-Drive Kit #BD1824200100 to the slave jack itself. He also said that if you need to switch the motor wires to make it work correctly, that would be fine, as…

view full answer...

Answer 10

So I have your hub narrowed down to a few different possibilities but we need to know what your bolt pattern is to know for sure. We have the part #84556UC3 for if your bolt pattern is 5 on 5 inch. We have the part #845476UC3 for if your bolt pattern…

view full answer...

Answer 11

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 12

Yes, the #TLD2142 is exactly what you need for your 2019 Ram 3500 with running boards extending under the truck bed. For the rear, you need the #TLD3112 if you have the factory hitch or #TLR3510 if you have the TorkLift SuperHitch Magnum 30K.

view full answer...

Front HappiJac Camper Tie Down With Stabilizer Bar For A 2016 Chevrolet Siverado 2500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching