Will Curt Front Hitch for 2019 Ram 1500 Block License Plate

Question

Question:

Will it interfere with front license plate bracket? If so, can you recommend an alternate bracket?

asked by: Skip

1

Helpful Expert Reply:

I do show that the Curt Front Mount Trailer Hitch Receiver part # C87FR which is a fit for a 2019 Ram 1500 will interfere with the license plate but only when the hitch is in use. Therefore, if you don't have anything in the hitch then the plate can remain in the factory location. I would simply use the upper mounting holes in the bumper for the lower mounting holes on the license plate while the hitch is in use.

expert reply by: Conner L

1

Answer 1

Yes, the Curt front hitch part #C87FR that you referenced is a confirmed fit for your 2021 Ram 1500 with factory tow hooks. The tow hooks of the truck do need to be removed to install this hitch though which is the case for all front hitches that…

view full answer...

Answer 2

The Curt Front Mount Trailer Hitch Receiver #C87FR will not interfere with the automatic air dam on your 2021 Ram 1500. See the attached photo which shows the hitch installed on a Ram 1500 like yours. The automatic air dam can be seen in the lower…

view full answer...

Answer 3

The Curt Front Mount Trailer Hitch Receiver part #C87FR which is a fit for a 2019 Ram 1500 will work on models with the active air damn behind the fixed splitter. This can actually be seen in a photo from the instructions which I attached below,…

view full answer...

Answer 4

Yes, the Curt Front Mount Trailer Hitch Receiver part #C87FR is a great option for a front mount hitch on the 2020 Ram 1500 Lone Star. It is rated for a line pull of 9,000 lbs (winch) and vertical load of 500 lbs (tongue weight). I have attached…

view full answer...

Answer 5

There is a front mount hitch for your 2022 Ram 1500 Limited Longhorn that isn't the Classic, but it only fits if you do not have the factory towing hooks. You'll need to the Curt #C87FR to fit your truck.

view full answer...

Answer 6

Yes! I can definitely provide you with a photo of how the Curt Front Hitch #C87FR looks when installed on a compatible Ram model. Please see the attached picture for your convenience. The truck in the picture is a 2020 model. The great thing about…

view full answer...

Answer 7

We have just what you are looking for. The Curt Front Mount Hitch Receiver, #C87FR, will fit the 2021 Ram 1500 as long as it isn't the Rebel model or a diesel model. Unfortunately there is no front hitch option for those models yet. For a…

view full answer...

Answer 8

Yes, per Curt The Curt Front Mount Trailer Hitch Receiver #C87FR is confirmed to fit your 2020 RAM 1500 Limited with speed speed activated air dam factory hooks and e-torque engine. The front mount hitch has an easy, bolt-on installation with no…

view full answer...

Answer 9

The Curt Front Mount Trailer Hitch Receiver part #C87FR is a fit for your 2019 Ram 1500 Limited with the factory tow hooks. However, the tow hooks will need to be removed in order for the hitch to mount as they use one of the bolt holes needed for…

view full answer...

Answer 10

For the 2022 Ram 1500 with the eTorque engine the front hitch you'd want is the Draw Tite part #65081 which I confirmed as a fit for your truck unless it has factory tow hooks. The Curt you mentioned does not fit your truck. At this time Curt…

view full answer...

Answer 11

The only front hitch currently (May 2022) available for your 2020 Ram 1500 is the Curt #C87FR. This does require you to remove that front fascia air dam under the front bumper but you will need to make a cutout for the hitch receiver to fit through…

view full answer...

Answer 12

The weight on the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" part #C87FR is just under 50 Lbs. This is also confirmed to fit your 202 Ram 1500.

view full answer...