What is the Weight on the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" part # C87FR

Question

Question:

What is the weight of this item?

asked by: Philip

0

Expert Reply:

The weight on the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" part # C87FR is just under 50 Lbs. This is also confirmed to fit your 202 Ram 1500.

expert reply by: Randy B

0

Answer 1

The tow hooks of your 2020 Ram 1500 do need to be permanently removed to install the Curt hitch #C87FR that you referenced. There isn't a similar hitch that would allow the tow hooks to remain.

view full answer...

Answer 2

Yes, the Curt Front Mount Trailer Hitch Receiver part #C87FR is a great option for a front mount hitch on the 2020 Ram 1500 Lone Star. It is rated for a line pull of 9,000 lbs (winch) and vertical load of 500 lbs (tongue weight). I have attached the…

view full answer...

Answer 3

The only front hitch currently (May 2022) available for your 2020 Ram 1500 is the Curt #C87FR. This does require you to remove that front fascia air dam under the front bumper but you will need to make a cutout for the hitch receiver to fit through…

view full answer...

Answer 4

I do show that the Curt Front Mount Trailer Hitch Receiver part #C87FR which is a fit for a 2019 Ram 1500 will interfere with the license plate but only when the hitch is in use. Therefore, if you don't have anything in the hitch then the plate…

view full answer...

Answer 5

The Curt Front Mount Trailer Hitch Receiver part #C87FR which is a fit for a 2019 Ram 1500 will work on models with the active air damn behind the fixed splitter. This can actually be seen in a photo from the instructions which I attached below,…

view full answer...

Answer 6

Yes, the Curt Front Mount Trailer Hitch #C87FR that you referenced is confirmed to fit and will work perfectly on your 2019 Ram 1500 Tradesman Short Bed without the factory tow hooks. This is a custom hitch that's designed to line up to existing…

view full answer...

Answer 7

Yes! I can definitely provide you with a photo of how the Curt Front Hitch #C87FR looks when installed on a compatible Ram model. Please see the attached picture for your convenience. The truck in the picture is a 2020 model. The great thing about…

view full answer...

Answer 8

It's possible the noises you describe hearing from your RV's Converter/Charger when plugged into electricity are normal. If you listen closely you will also hear a humming sound which is also normal. The clicking and pinging sounds you are…

view full answer...

Answer 9

Using a hitch extender is safe as long as you stay within the limits specified of 50 percent of the hitch and vehicle load capacity, and 350 lb tongue weight capacity of part #HE06. The other option to provide additional clearance from your spare…

view full answer...

Answer 10

The Curt Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide #13703 can be mounted to that 4 inch bar your mentioned. That is considered a part of the frame and is a safe location for this trailer hitch receiver.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...