How To Confirm Fit of Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System

Question

Question:

2021 Salem Hemisphere 271RL.... Will this system work?

asked by: Dan P

0

Expert Reply:

The Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System part # LC672136 is designed for trailers with a GVWR of up to 10,000 lbs. I cant comment on fit for any specific make/model but the universal design will allow it to accommodate most trailers. It's best to look over the install instructions for more detailed fit info. These are attached below.

expert reply by: Conner L

0

Answer 1

In regards to the amount of travel that the rear jacks of the Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System #LC672136 offer, 12 inches is the amount each jack can extend to offer to level your trailer. The jacks are not…

view full answer...

Answer 2

Yes, we have checked with Lippert in the past and their Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System #LC672136 is compatible with boxed frame RVs like your 2019 Outdoors RV Backcountry series Model 23KTS.

view full answer...

Answer 3

I spoke with my contact at Lippert about the measurement for mounting the rear jacks of the Lippert Ground Control TT #LC672136 and it sounds like you'll be fine to mount the jacks but this is what they sent me: The reason it needs to be between…

view full answer...

Answer 4

I reached out to Lippert and the four C-jacks included with the Lippert Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System #LC672136 measure 38.32" long x 20.62" wide. The C-jacks also have a retracted height of…

view full answer...

Answer 5

Nope; there are electrical standards that are required, so even though your travel trailer only has 30 amp service, you will indeed need to supply a 50 amp circuit breaker for the Ground Control TT, which is the following part number: - Electric…

view full answer...

Answer 6

If you're wanting to continue to use the Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System #LC672136 then you need to replace your tongue jack with the exact replacement part #LC421366. While I do love the Phoenix…

view full answer...

Answer 7

We do have the panels separately. What you're looking for is the Go Power Overlander Expansion Kit - 200 Watt Solar Panel #34282182.

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The 24x84 etrailer Cargo Carrier for RV Bumper part #e96ZR can hold a spare tire but there isn't any sort of specific mount for this. The photo attached below is a custom job from a neighbor and I'm not totally sure what they used to create…

view full answer...

Answer 10

With a ladder on the back of your RV it is unlikely you will still be able to fold up the 24 x 84 etrailer Cargo Carrier for RV Bumpers #e96ZR. Reason why is when the carrier folds up it takes up all the space of the bumper, so unless your bumper…

view full answer...

Answer 11

The 24x84 etrailer Cargo Carrier for RV Bumper #e96ZR is going to fold up and sit on top of the mounting brackets, so anything that would sit above the bumper of your 2022 Jayco Redhawk Class C Motorhome is going to interfere with the cargo…

view full answer...

Answer 12

The 24x84 etrailer Cargo Carrier for RV Bumper #e96ZR is designed for 4" x 4" bumper tubes so this particular cargo carrier wouldn't be a compatible fit to attach to your trailer hitch crosstube. Instead I recommend a hitch mounted…

view full answer...

How To Confirm Fit of Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching