Are There Replacement Legs Available for Husky Jacks?

Question

Question:

Hello I have a husky 4500R Electric tongue jack that has a bent leg was wondering if a new leg could be ordered

asked by: Ken R

0

Expert Reply:

I do have a potential alternate available, but as the Husky Brute Jacks are no longer being produced by the manufacturer, there is not be a replacement leg available.

The Stromberg Carlson Electric Trailer Jack # SC63VR will match the Husky's 4,500 pound capacity and has just an inch less of lift.

expert reply by: Lazer S

0

Answer 1

The Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black Item #JET-5000 is 23 inches above the trailer so it will not work with the Jack-it Bike Rack #LC429756, but I do have a solution for you. The…

view full answer...

Answer 2

Absolutely! From the top of the Stromberg Carlson Electric Trailer Jack #SC63VR to the mounting flange is 21-1/4" and from the front of the jack to the tube is 5-5/8" as shown in the included diagram. I included a video of the #SC63VR for…

view full answer...

Answer 3

Since the trailer jack is only supporting a portion of the trailer's weight, I recommend a 4,500 lb jack for your 10,000 lb trailer. The tongue weight of your trailer should between 1,000 lb to 1,500 lbs so a 4,500 lb jack would be more than…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 6

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 7

The Replacement Amber Lens for MC32AB Trailer Lights #A32AB is a direct replacement for the SAE A P2 DOT 14 and would be what you'd need.

view full answer...

Answer 8

A tow package for a vehicle is usually a frame mounted trailer hitch and trailer wiring on a vehicle like your 2002 Dodge Dakota. If you have those two things you could pretty easily assume you have the tow package. Or, you can take the VIN of your…

view full answer...

Answer 9

The best modern day size replacement option we have for a 6.00-16 is a 235/80-16 which measures 30-7/8" diameter x 9-3/8" wide. For this, I recommend the Kenda Karrier ST235/80R16 Radial Trailer Tire with 16" Black Mod Wheel part…

view full answer...

Answer 10

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 11

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Are There Replacement Legs Available for Husky Jacks?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching