50amp SmartPlug Cord Package Contents

Question

Question:

In the listed item, SM86FR, it appears to include both the cord, with male Smartplug and male park connector attached, and the that is installed to the trailer/rv. Not sure about the Smartplug though. Is it included?

asked by: Erik S

0

Expert Reply:

The SmartPlug RV Power Cord - 125/250V - 50 Amp - 30' Item # SM86FR does not come with the smart plug RV receptacle.

If you need the receptacle we offer the SmartPlug Replacement RV Power Inlet - 50 Amp - Gray Item # SM29FR

expert reply by: Kevin C

0

Answer 1

I sure can; I have added a photo for you with the dimensions of the mounting hole for the 50 amp SmartPlug inlet and connector. This comes in your choice of three different colors, and the dimensions are the same for each: - Black: SmartPlug RV Power…

view full answer...

Answer 2

I have a power cord which is the same thing but more so what you're looking for. This cord is rated for 125 and 250V unlike the one you were looking at. The SmartPlug RV Power Cord - 125/250V - 50 Amp - 30' Item #SM86FR is rated for 125/250V.…

view full answer...

Answer 3

Yes the SmartPlug RV Power Cord #SM86FR that you referenced will stay flexible when the weather is cold. This would not get difficult to wrap up if the temperature was to drop.

view full answer...

Answer 4

For suspension enhancement for a trailer we have a similar setup to an air kit, but it's actually a rubber spring instead. For a 1,000 lb axle kit you would want the part #TTRA1702. For a 7,000 lb axle kit you would want the part #TTRA1032. For a…

view full answer...

Answer 5

You will be okay to use the SumoSprings Trailer Helper Springs #SS26MV on your trailer. SumoSprings recommends that there be between 1/4" and 1/2" of preload in the springs when installed. As the springs are 5" tall you will have…

view full answer...

Answer 6

The best solution for the type of spring you want on your size trailer is the Timbren Trailer Suspension Enhancement System Heavy-Duty Trailers #TTRA5602. These springs will work the same way as the Timbren springs on your truck, absorbing road…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The correct Roadactive kit that fits your 2023 Ford F-150 is the part #RAS3611-YHD. I really like the RAS kits as they basically don't have any downsides. You get the adjustable support, an easy install, no maintenance, and actually improves…

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

50amp SmartPlug Cord Package Contents

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching