Is the Motor Enclosed on the MaxxAir Mini Deluxe Trailer Roof Vent

Question

Question:

Does this model have an enclosed motor? I am considering it for use in a chicken coop.

asked by: Lisa

0

Expert Reply:

The MaxxAir Mini Deluxe Trailer Roof Vent, # MA00-03801 has a bug screen over the fan blade and the motor is encased within the upper and lower pieces of the unit. Please see the attached product review video.

expert reply by: Michael R

0

Answer 1

The MaxxAir Mini Deluxe Trailer Roof Vent part #MA00-03801 for white or part #MA00-03851 for black is a single speed fan yes. However, when the light is on the power to the fan is reduced so you will get sort of a low speed setting but it's not…

view full answer...

Answer 2

The MaxxAir Mini Deluxe Trailer Roof Vent #MA00-03801 does not have a required wattage; instead it simply requires a 12V power source. It is a 2-wire design with a white ground wire and black power wire that connects to your RV's 12V supply. This…

view full answer...

Answer 3

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 4

The Dometic Ultra Breeze Trailer Roof Vent Cover part #DMC38FR installs using brackets which secure to the vent lid flange. The brackets are screwed into the roof but the cover is attached to the bracket using pins and is easily removeable. I have…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Answer 7

Hey Paul, we have a Blue Ox base plate kit that fits your 2024 Nissan Versa with the part #BX1856. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle.…

view full answer...

Answer 8

Hey David, we've used the LaSalle Bristol RV Roof Vent install kit part #344270KITW to install several MaxxFan RV roof vents and it's worked well so it would also work well for you. This comes with everything needed so it would be a great…

view full answer...

Answer 9

Hey Devon, does your RV roof vent wall control unit look like the #MA59FR? If so you have a MaxxFan Plus RV roof vent that was designed for wall control and for a replacement unit you would want the part #MA00-04500K to use a setup that would use…

view full answer...

Answer 10

Hey Frankie, The bracket for the Timbren Suspension Enhancement System #TFR250SDJ has a locknut in it that makes it feel like the bolt (part #4) is fully tightened when it's not. Their techs have stated that you just have to push past this point…

view full answer...

Answer 11

I recommend the Alpha Systems Butyl Tape for RV Weatherproofing #AL28FJ as it's 1" wide to fully cover the flange of your vent. Make sure you overlap the ends to form a tight waterproof seal. You can see me doing this at 2:50 mark in the…

view full answer...

Answer 12

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Is the Motor Enclosed on the MaxxAir Mini Deluxe Trailer Roof Vent

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching