Availability of RV Roof Vent Garnishes

Question

Question:

I am looking for the ceiling vent garnish for a 2007 Fleetwood Bounder 38n diesel motorhome. Please give exact measurements and brands available. Thanks in advance

asked by: David

1

Helpful Expert Reply:

I attached a link to this page that has all of the ceiling garnishes we offer for RV roof vents and on that page you can select the brand of vent that you have and see what you'd need. We have Fan-Tastic, Maxxair, and Ventline in various sizes.

expert reply by: Jameson C

1

Answer 1

I measured the Ventline Ceiling Garnish #VA0445-37 for you. I found the garnish to measure 15-7/8 inches x 15-7/8 inches overall. On the underside, the trim measures 1-3/16 inches wide. The inside dimensions are 13-1/8 on the end farthest from the…

view full answer...

Answer 2

I went out to the warehouse to measure the Ventline Ceiling Garnish #VA0445-37 for you. I found the garnish to measure 15-7/8 inches x 15-7/8 inches overall. On the underside, the trim measures 1-3/16 inches wide. I've attached a photo showing…

view full answer...

Answer 3

The Replacement MaxxFan Plus 4-Speed Roof Vent with White Lid #MA00-04751KSX is meant to be a direct replacement however not all the necessary hardware is included. The remaining items you'll need is the Key Wall Control part #MA00A03550K,…

view full answer...

Answer 4

it sounds like you are looking for the Ceiling Garnish for MaxxAir Maxxfan RV Roof Vent - White #MA54FR which fits 13-1/2" x 13-1/2" cutouts, and will be right at 16" x 16" from outside of flange to outside of flange. This garnish…

view full answer...

Answer 5

To connect the Wall Control Panel for MaxxAir MaxxFan Plus Roof Vent #MA59FR you will need - if you don't have it - the Replacement Control Cable for MaxxAir MaxxFan Plus Roof Vent Wall Control Panel #MA69FR. You'll need to route that cable…

view full answer...

Answer 6

The MaxxAir MaxxFan Plus Roof Vent part #MA00-04751KSX is designed to replace an existing roof vent fan. Therefore, it does not come with everything needed for installation. The extra items you will need are as follows: Key Wall Control part…

view full answer...

Answer 7

I wasn't able to reference this part number but we do carry a few wall mount switches for MaxxAir Vent Fans, the part #MA59FR and part #MA00A03550K. If yours look like either of these two options then they will work great for you but they are the…

view full answer...

Answer 8

It looks like you have the MaxxAir MaxxFan Plus Roof Vent w/ 12V Fan - Powered Lift - 4 Speed - White #MA00-04751KSX. The unit sounds like it is malfunctioning and this could be due to the rain sensor #MA34FR. It sounds to me like the sensor is…

view full answer...

Answer 9

You reported that you cannot use the remote on your MaxxFan 4700K to put the vent cover up and down. Let's troubleshoot. Put some new batteries in your remote. Ensure that the display comes on. Verify if your vent cover now works. Verify if other…

view full answer...

Answer 10

Not a saint, but I should still be able to help you out! I believe you are asking about a standard square roof vent on your trailer, and you really just need to know two things - the size of the cut out of the vent opening and the (approximate) depth…

view full answer...

Answer 11

Essentially you need to measure the height of the garnish from above the lip to the very top. If you can't find one that fits exactly you can get a garnish that's too large and cut it down to size.

view full answer...

Answer 12

I would recommend marking it where it needs to be trimmed and using something like a rotary cutoff tool. Make sure you have the garnish secured so that it does not move around when trimming. The edges will be sharp after trimming the garnish so I…

view full answer...

Availability of RV Roof Vent Garnishes

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching