Steering Stabilizer For A 2004 Roadmaster Monaco

Question

Question:

Does the length of motorhome matter when purchasing this product? Thank you, Richard Thompson

asked by: Richard L

0

Expert Reply:

The mounting brackets can vary depending on the chassis of the vehicle they're going on. For your 2004 Roadmaster Monaco the confirmed fit is the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes # RM-RBK6-RSSA.

If you already have the correct mounting brackets and just need to replace your current Roadmaster stabilizer then you can get it with part # RM-RSSA.

expert reply by: Kevin C

0

Answer 1

The correct mounting kit for your 1996 Fleetwood Bounder Class A with a Ford F-53 chassis and V8 engine is #RM-RBK4, regardless of the motorhome's GVWR. This will include the original custom mounting brackets and all hardware that come in…

view full answer...

Answer 2

We do carry steering staiblizers for your 2001 Ford F-53 chassis RV. If you have a V8 you would need the part #RM-RBK4-RSSA which is a confirmed fit.

view full answer...

Answer 3

In order to reduce the jolting feeling in your steering you are going to want to add a steering stabilizer like the Roadmaster Reflex Steering Stabilizer part #RM-RSSA. The Reflex Steering Stabilizer contains a tempered steel spring that will work…

view full answer...

Answer 4

I checked with Roadmaster and the Custom Mounting Brackets #RM-RBK14 would be the correct bracket kit for your 2000 Freightliner to install a Roadmaster Reflex Steering Stabilizer #RM-RSSA.

view full answer...

Answer 5

If you are having a hard time keep the steering wheel centered while driving the RV then a steering stabilizer is the way to go. If the RV is getting pushed around by wind then an anti-sway bar would be the way to go. If you want the driving…

view full answer...

Answer 6

The two options you have for the Roadmaster Reflex Steering Stabilizer is part #RM-RBK4-RSSA for if you have a V8.

view full answer...

Answer 7

Yes we've checked with Roadmaster in the past and the Reflex stabilizer part #RM-RBK6-RSSA is the correct fit for your 2000 Monaco Diplomat RV.

view full answer...

Answer 8

The Dana/Spicer front axle is an automotive axle manufactured component your Roadmaster Monaco could have been equipped with which the #RM-RBK6-RSSA is not compatible with. Look on the BOM Bill of Material number plate for a number that starts with…

view full answer...

Answer 9

If your 2000 Roadmaster Chassis is the Air Ride or Monaco then you need the Roadmaster Reflex Steering Stabilizer with Mounting Brackets #RM-RBK6-RSSA. If you have the Straight Axle Leaf Spring instead then you need the Reflex Steering Stabilizer…

view full answer...

Answer 10

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

view full answer...

Answer 11

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…

view full answer...

Answer 12

Hey Scott, so we do have the SumoSpring Solo kit part #SSR-130-54 that is a confirmed fit for your 2018 Ford motorhome built on an E-450 chassis.

view full answer...

Steering Stabilizer For A 2004 Roadmaster Monaco

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching