I am Looking for the Dexter E-Z Flex Equalizer part # 013-143-03

Question

Question:

Greetings, Can you please provide me pricing and availability for 2 ea of Dexter part number 013-143-03, an EZ-Flex equalizer assembly? Thank you

asked by: John L

0

Expert Reply:

The Dexter E-Z Flex Equalizer that you are looking for is part # K71-652-00. I have attached a link to this product below that displays the current price and availability for you to check out.

expert reply by: John H

0

Answer 1

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 2

In order to convert the vacuum over hydraulic setup on your trailer to electric over hydraulic you will need an electric over hydraulic actuator, breakaway kit, and trailer wiring. The hubs you have now if operated by hydraulic pressure should not…

view full answer...

Answer 3

You shouldn't loose any wheel clearance with the Dexter E-Z Flex Suspension Kit. First you will want to see which of the Equalizers you need. There is a 6,000lb Equalizers #K71-654-00 (5-5/8") and 8,000lb Equalizers #K71-655-00…

view full answer...

Answer 4

For grease Dexter recommends wheel bearing grease in the EZ Flex Equalizers. For that we recommend the red grease part #L11390 which is the most heavy duty and best protecting.

view full answer...

Answer 5

I would be happy to help! Since the horizontal mounting hole measurement of the equalizers on your 2016 Winnebago 2351DKS is 5-1/2" there are a few different equalizer upgrade options. To determine which one will be best for you, you will need…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

view full answer...

Answer 8

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 9

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 10

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...

Answer 11

Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is the…

view full answer...

Answer 12

I have attached for you below some common torque values needed for a trailer suspension system but a lot of these will vary by bolt size and other factors. U-Bolts: Varies by Size - 1/2" bolts: 45 ft/lbs - 70 ft/lbs, 9/16" bolts: 65 ft/lbs…

view full answer...

I am Looking for the Dexter E-Z Flex Equalizer part # 013-143-03

Product Page this Question was Asked From

Continue Researching