Will EcoHitch Trailer Hitch Receiver 306-X7266 Fit A 2018 Subaru Outback Wagon 2.5i Premium?

Question

Question:

I am new to Subaru and not sure if there is a difference between these two versions. Will hitch #306-x7266 fit my 2018 subaru outback 2.5i Premium. In the picture on your site, the Outback is 3.6 version

asked by: James C

0

Expert Reply:

Yes. The EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2" # 306-X7601 you were looking at is confirmed to fit all models of the 2018 Subaru Outback Wagon including your 2.5i Premium model.

This hitch has a 525lb tongue weight rating and a 3500lb trailer weight rating making it a perfect option for carrying a bike rack, a cargo carrier, or for a ball mount to tow a trailer.

If you are planning on towing a trailer you will also need a vehicle wiring harness # 118467.

I included videos showing each of the products mentioned being installed on a 2018 Subaru Outback Wagon for you to take a look at.

expert reply by: Samuel C

0

Answer 1

For your 2018 Subaru Outback Wagon the Class III hitch I would recommend is the EcoHitch part #306-X7601 as the overall winner. It has the higher Class III towing capacities, doesn't require the stabilizer strap when carrying a bike rack like the…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 10

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 11

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Will EcoHitch Trailer Hitch Receiver 306-X7266 Fit A 2018 Subaru Outback Wagon 2.5i Premium?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching