Front receiver hitch for 2007 Chevy Silverado 2500 HD

Question

Question:

I need a bolt on front receiver hitch for my 2007 Chevy Silverado 2500 HD, new body style, that has a maximum tongue rating of over 600 lbs. I want to carry a three wheel scooter on the front. Weight of scooter is 577lbs. Everything I can find tops out at 500 lbs. thank you.

asked by: Mark M

0

Expert Reply:

We have Front Mount Trailer Hitch Receivers from Draw-Tite # 65050, and from Curt # 31109 that both have a max vertical weight limit of 500 lbs. This is max rating I have been able identify from our suppliers. I do not find a custom bolt on front mount with a limit in excess of 600 lbs.

expert reply by: Michael R

0

Answer 1

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 2

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 3

Since the issue appears to be on the vehicle side for your 2017 Toyota Tacoma, I recommend first checking the connector itself. Look to see if there is any dirt or corrosion built up inside the connector that may preventing a solid connection with…

view full answer...

Answer 4

If you need 18 feet of E-track I recommend using 2 pieces of 8 feet Horizontal E-track part #E19135 and 1 piece of 2 feet E-Track part #EM59150. 8 feet is the longest Horizontal E-Track available. The E-track pieces are not designed to be mounted…

view full answer...

Answer 5

I cannot determine which rear bumper that you have from your picture so I will give you to options based on which bumper you have on your 1989 Chevrolet K3500 Crew Cab Pickup with the 8' bed. The Draw-Tite Ultra Frame Trailer Hitch Receiver…

view full answer...

Answer 6

Hey Karen, yes, the Curt Trailer Hitch Receiver #C11454 will fit your 2021 Mercedes-Benz E-450 4Matic All Terrain.

view full answer...

Answer 7

On equalizer 013-105-04 in kit #K71-360-00 the eye center to eye center measurement is approximately 7-1/2 inches.

view full answer...

Answer 8

What you are wanting to do is very possible with the GO Power Solar Panel kit part #34273836. You could mount it on your pin box and then run the wiring to your batteries via an SAE connector. We don't have an SAE connector adapter but they are…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The spacing will depend on the axle diameter and on which particular spring hanger kit you use. If you have a 6000 lb 3 inch diameter axle, and you're using the #APT5 hanger kit which includes 7-3/4 inch equalizers and 2-5/8 inch shackle straps…

view full answer...