B&W Companion OEM 5th Wheel Trailer Hitch Arm Height

Question

Question:

I recently purchased a new 2021 Ford F-350 4WD 8 foot bed. Im installing the BandW Companion 5th wheel hitch Model 3300. What is the recommended pin location and pivot arm height?

asked by: Roy R

0

Expert Reply:

I suggest starting no lower than the mid point and taking measurements from there for needed adjustments. If you end up at the highest setting, don't be surprised; the bed rails on trucks each year seem to growing. For the B&W Companion OEM 5th Wheel Trailer Hitch w Slider for Ford Towing Prep Package, # BWRVK3370, please see the attached installation video for assistance and the help article for installation tips.

expert reply by: Michael R

0

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 4

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 5

For an above bed rail kit that fits your 2017 Ford F-250 you can use the B&W Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches #BWRVK2402. These are industry standard rails (ISR) that are compatible with B&W Patriot, Curt,…

view full answer...

Answer 6

The recommendation for the 10" diameter lube plate on a B&W Companion 5th Wheel Trailer has come from the manufacturer of the fifth wheel hitch, B&W. The Lube Plate for Reese 5th Wheel Trailer Hitches part #RP83002 will work just fine…

view full answer...

Answer 7

Beds shorter than 8 foot do commonly need a slider hitch David, but a lot of modern fifth wheel trailers are now made with tapered noses to help and in a lot of cases a slider isn't required. So if the trailer you plan to tow has a tapered nose…

view full answer...

Answer 8

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 11

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

Answer 12

The OEM puck system is optional for Ford pickups so the only way to tell if your 2017 Ford F-250 has the puck system or not is to physically look in the bed for the pucks like what you see in the attached photo. If you do have the puck system then I…

view full answer...

B&W Companion OEM 5th Wheel Trailer Hitch Arm Height

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching