Bolt Size & Thread Tap For C11265 & C13140 Trailer Hitches

Question

Question:

Hi , Are the bolts for the c13149,2007 corolla, the same for c11265 2018 rav4? I had to tap the c11265 with a-12mm-1.25 27/64. now i have to tap the c13149!Are the bolts the same? Will this tap 12mm-1.25 27/64 work? Thank you

asked by: Paul G

0

Expert Reply:

Yes, the bolts are indeed both M12 x 1.25 bolts for both the hitches you mentioned, the Curt Trailer Hitch Receiver # C11265 and # C13149.

So you can use a thread tap for those M12 x 1.25 bolts and you'd be set.

expert reply by: Kyle S

0

Answer 1

Both the Curt #C13382 and the etrailer #e98912 hitch are a 2" Class III hitch receiver that will provide a maximum gross trailer weight of 3,500 lbs and a maximum tongue weight of 525 lbs. You are correct, they are an identical hitch but…

view full answer...

Answer 2

If you want to install the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13182 on your 2016 Jeep Grand Cherokee, you will use M14 bolts that are grade 5 as well as compatible flat washers. That is the replacement for what is…

view full answer...

Answer 3

The correct size tread tap that would be needed for the weld nuts on a 2017 Toyota RAV4 when installing the Curt Trailer Hitch Receiver part #C13149 is 12 mm x 1.25".

view full answer...

Answer 4

Since the Curt #C13149 Class III trailer hitch you referred to is a fit for 2006 to present RAV4 models, I'll assume yours falls within that range of model years. The tow hook, if present, is on the driver's side frame rail just forward of…

view full answer...

Answer 5

I spoke with my Curt representative, who tells me that using the hitch as a lifting point is not recommended, as the hitch is not intended or designed for this purpose. According to the owners manual for the 2013 Rav4, the only recommended jacking…

view full answer...

Answer 6

The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13149 is a confirmed fit for 2006 to 2018 Toyota RAV4 models with the exception of electric models. Your exhaust will need to be lowered but it should simply bolt into place unless…

view full answer...

Answer 7

The Curt Hitch part #C13149 is a confirmed fit for your 2016 Toyota RAV4. You can't reuse the install hardware since the bolts are considered one-time-use. You would need the part #RHK to get new hardware. On the product page you would just need…

view full answer...

Answer 8

Replacement hitch installation hardware is available. All you need to do is enter the part #RHK into our search box and click go. Then you will then enter your hitch part number, such as #C13149, and select the manufacturer from the drop-down menu.…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Bolt Size & Thread Tap For C11265 & C13140 Trailer Hitches

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching