Dexter Torsion Axle Lift Kit for 2015 Livin Lite Trailer
Question:
I want to purchase a 2-5/8inch lift for my Dexter Torsion Axles tandem. This is on a 2015 Livin Lite 6x15 an all aluminum toy hauler - the company went under. My axle tags say: Dexter Axle 09H-2707787 S/N 122096597 Capacity 2200 LBS HF = 79.0 OB = 66.00 SA: 00NT The are side mount/flange mount and there are no bolts in the top flat portion that abuts the frame member which is a fully boxed alumunim tube. They are flat mount axles without the high-lift flanges. The particular trailer was built with very low ground clearance and the torsion arms have an angle upwards from the axle which lowers it further. I dont want to off-road with it, but Im worried that the grey/black water drain sits very close to the ground and might be easily damaged on uneven terrain. Im also considering increasing the ground clearance and possibly move up a tire size from the stock ST205/75r15.
asked by: Dallas P
Expert Reply:
For your Dexter torsion axle that has a 2,000 lb capacity the correct lift kit is the part # K71-723-01 for each axle. This will give you a lift of 2-5/8 inches.
Product Page this Question was Asked From
Torflex Lift Kit - Single Axle - 2-5/8" Lift
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Single Axle
- Dexter
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Torflex Lift Kit - Single Axle - 2-5/8" Lift
- Shop: Brake Controller
- Shop: Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System - 10,000 lbs
- Shop: Trailer Hitch
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Timbren Axle-Less Trailer Suspension w Electric Brakes - Standard Duty - No Drop - 5 on 4-1/2 - 3.5K
- Video: Lippert Electric Travel Trailer Leveling System Installation - 2022 Forest River Flagstaff Micro Lit
- Q&A: Recommended Suspension Lift Kit And Jacks For Livin Lite Quicksilver 8.1 Pop-up Camper
- Shop: Replacement Wind Deflector Fairing for Rhino-Rack Steel Cargo Basket
- Shop: Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers - Steel - 200 lbs
- Q&A: Do You Sell a Hitch Carrier for a Honda EU3000 Generator?
- Q&A: Raising Trailer with Welded On Torsion Axles
- Search Results: k71 047 00
- Video: etrailer Electric Trailer Brake Assembly Installation
- Q&A: What is Recommended Tire Pressure for Viking Pop Up Trailer
- Shop: RV Mattress
- Search Results: k71~723~01
- Video: Dexter Axle Torflex Lift Kit Review
- Video: Dexter Axle Trailer Axles K71-723-01 Review
- Q&A: Replacement Bearing Kit for 2000 Viking Pop Up Camper with L44649 Inner and Outer Bearings
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Shop: Trailer Wiring
- Video: Choosing the Right Brake Controller
- Shop: Suspension Enhancement
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Choose the Right Trailer Hitch Class
on Trailer Suspension Parts
