Fit/Compatibility of C57000 Relay Kit on 2017 Nissan Frontier Pickup

Question

Question:

hello, do you know if this fits the 2017 nissan frontier? and if so, do you just sell the white/brown relay? thanks

asked by: Mike

0

Expert Reply:

We don't sell the white/brown relay by itself, but we do offer all three relays for the running lamp, right turn/brake and left turn/brake lamps as the part # C57000 that you've looked at. These are the correct relays needed to activate the tow package on a 2017 Nissan Frontier that wasn't equipped with the tow package.

expert reply by: Mike L

0

Answer 1

This is a very common issue with newer Nissan vehicles like your 2019 Nissan Frontier. There is a missing relay needed to activate the trailer running light circuit. The running light relay can be installed or replaced with #C57000. One likely…

view full answer...

Answer 2

In your 2014 Nissan Frontier, the blue relay you mention is for the running lights and turn signal. The brown relay has to do with 12V power. You can replace faulty relays with the Curt Relay Kit for Nissan Aftermarket Tow Package #C57000. This…

view full answer...

Answer 3

If you installed a trailer wiring harness on your 2012 Nissan and the running lights are not working, then you may need to install an additional blue relay under the driver's side dash. You can use one of the blue relays from the Curt Relay…

view full answer...

Answer 4

If your 2012 Nissan Frontier has a 7-way trailer connector then you will need to use both blue relays as well as the brown relay. If you only have a 4-way trailer connector then you would only need to use one blue and one brown relay. If you do not…

view full answer...

Answer 5

We do have one option for you, the Taskmaster Steel 8-Spoke Trailer Wheel w/ Offset #TTW550547WS1. This wheel has the unique 5 on 4-3/4" bolt pattern you are needing, and it measures 15" x 5" wide making it a perfect choice…

view full answer...

Answer 6

If you indeed had the factory tow package on your 2010 Nissan Frontier then the trailer wiring relays would be located under the hood in the fuse panel next to the battery. If the relays are located under the drivers side kick panel then your…

view full answer...

Answer 7

An oil seal like Redline part #9103309 installs in the back side of the hub (the side nearest the trailer's frame) with the sides or "legs" of the seal inserted into the hub's bore. This means that the flat metal…

view full answer...

Answer 8

Trailer running lights not working with certain Nissan vehicles is a common problem with an easy fix. There is a relay for the trailer running light circuit that is located in the fuse box (in the cab). If that relay is missing or no longer…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13…

view full answer...