Does Replacement Head Unit for Curt A25 5th Wheel Hitch Come With Mounting Bolts

Question

Question:

Does this come with bolts to attach to the base unit?

asked by: Spear

0

Expert Reply:

The mounting bolts are indeed included with the Replacement Head Unit for Curt A25 5th Wheel Trailer Hitch # C16580.

I have added a photo of the # C16580 for you which shows the included mounting bolts.

expert reply by: Kyle S

0

Mounting Bolts Included With Curt A25 Replacement Head
(click to enlarge)

Answer 1

There is a replacement hardware kit for the Head Unit for Curt A25 5th Wheel Trailer Hitch #C16580 that you mentioned. The hardware kit, which attaches the head to the legs, is the following part number: - Replacement Hardware for Curt A Series and Q…

view full answer...

Answer 2

The leg kit you need to install the head and center section of your Curt Q20 hitch in the factory rail kit of your 2011 Ford F-350 with the factory towing package is the part #C16017. This would be all that you need.

view full answer...

Answer 3

For your 2012 Ford F-350 with 8 foot bed and factory pucks, the Curt 5th Wheel Round Tube Slider for Ford Super Duty Towing Prep Package - 12" Travel #C16020 will fit, but a slider is not required for your 8 foot bed. It won't hurt when used…

view full answer...

Answer 4

If you are wanting a hitch with a higher capacity that fits inside your Ram 3500's puck system, I recommend the Curt Q25 5th Wheel Hitch item #C16049. This hitch has a 25,000 lbs towing capacity and a 2-jaw locking system. This 5th wheel hitch…

view full answer...

Answer 5

The two best options from what you mentioned are the Reese M5 part #RP30918 and the Companion #BWRVK3600. If you wanted to go with a Curt the A25 part #C16046 would be the better option as this essentially is the updated version of the Q series with…

view full answer...

Answer 6

Curt is the manufacturer of the Mopar branded 5th wheel trailer hitches. For example, the Mopar 5th Wheel Trailer Hitch part 82214742 is the same as the Curt Q20 5th Wheel Trailer Hitch part #C16530-16021 and the Mopar 5th Wheel Trailer Hitch part…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Does Replacement Head Unit for Curt A25 5th Wheel Hitch Come With Mounting Bolts

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching