Which Saris SuperClamp Tilt Adapter for 2 Inch Receiver

Question

Question:

Just curious as to why there is such a big design difference between the 1 1/4 and 2 inch receiver models? I have a 2 inch hitch on my outback....which one would be best?

asked by: Brad W

0

Expert Reply:

If you're trying to make a Saris SuperClamp # SA4026F or # SA4025F into a tilting rack with a 2" receiver on your Subaru Outback you're going to need the Tilting Base for Saris SuperClamp Hitch Racks - 2" Hitches # SAR56VR. I'm not sure the reason for the difference in design but I believe it's mostly down to the size of the tubing used on the shank. They do have slightly different handles, but they will both function in the same manner.

expert reply by: Erik B

0

Answer 1

The Tilting Base for Saris SuperClamp Hitch Racks item #SAR56VR does not come with a locking screw and nut. You will need to purchase the replacement Hitch Tite Anti-Rattle Hitch Pin for Saris Bike Racks item #SA3021. If you would like an anti rattle…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Which Saris SuperClamp Tilt Adapter for 2 Inch Receiver

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching