Are Additional Steps Needed To Install Curt Hitch C29UR on 2018 Chrysler Pacifica Hybrid

Question

Question:

Is there a video or description of the additional steps beyond the coverage in the 13462 installation instructions bulletin beyond the base model 13462 hitch for the non-hybrid Pacifica to install the C29UR hitch package that must include the 13466-SK additional installation parts on the hybrid model? I need to plan for installing my daughters hitch on order from you on my 2018 Pacifica but the f Differences seem to be a mystery obstructed behind an enigma...

asked by: William C

0

Expert Reply:

The Curt hitch part # C29UR that fits the 2018 Chrysler Pacifica does not have any additional steps required to install beyond what's mentioned in the detailed instructions link attached to this page. The other fit part # C65CR that's for the non-hybrid models has slightly different dimensions which allows for the different fit application and is not based on different install steps.

expert reply by: Jameson C

0

Answer 1

We've got just what you need. If you don't already have a 4 way connector on the back of your 2020 Jeep JL you'll first need to install that using the Tekonsha T-One Wiring Harness #118786. This harness will tee into your Jeep's tail…

view full answer...

Answer 2

That is correct. If your 2021 Wrangler Unlimited has the connector located under the dash to the left of the steering column near the top of the e-brake pedal as shown in the provided photo, you'd use the #3073-P harness to connect the #90195…

view full answer...

Answer 3

Since your 2020 Jeep Wrangler Unlimited does't have a tow package, there are a few parts you'll need to install before you can use a brake controller, but I can recommend ones that will require little to no splicing, to make the install as…

view full answer...

Answer 4

I recommend the Curt Trailer Hitch Receiver #C29UR for your 2022 Chrysler Pacifica PHEV. This hitch fits all models and won't require an additional kit to fit the hybrid. It has a 2" receiver and max tongue weight of 400 lbs which will be…

view full answer...

Answer 5

I checked with the trailer hitch manufacturers and can confirm there is one trailer hitch that is a fit for the 2021 Chrysler Pacifca, which is from Curt: - Curt Trailer Hitch Receiver #C29UR This hitch (which does fit the 2020 model as well) has a…

view full answer...

Answer 6

The Curt #C29UR and the Draw Tite part #76046-SK are definitely the most hidden options for your 2021 Chrysler Pacifica Hybrid but the edge goes to the Curt in terms of least visible since the safety chain loops are horizontal and smaller. I attached…

view full answer...

Answer 7

That is correct. To install the Curt Trailer Hitch Receiver #C29UR on your 2018 Chrysler Pacifica Hybrid you will need to remove two the exhaust hangers from the rubber isolators, and support the exhaust to make sure it does not get damaged. Next you…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 11

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Are Additional Steps Needed To Install Curt Hitch C29UR on 2018 Chrysler Pacifica Hybrid

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching