Weight of EcoHitch 306-X7257 Class III Receiver Hitch

Question

Question:

I see that the weight ratings for carrying capacity are listed, but how much weight does the hitch receiver itself weigh? I am very interested in the product but am concerned about the weight it would add to my car and how it would impact performance. Having a figure on the lbs this part itself weighs without it being in use will assuage these concerns so I can feel secure in buying this in the coming months. Thank you!

asked by: Nicholas W

0

Expert Reply:

Including the mounting hardware kit, the EcoHitch # 306-X7257 which is a fit for the 2015-2021 Subaru WRX weighs just under 40 lbs.

If a Class I hitch with a 1-1/4 inch receiver opening would work for you, and you feel that the # 306-X7257 would be too heavy, the Curt Class I, part # C11408 weighs about 10 lbs less, at just shy of 30 lbs.

The weight of either hitch shouldn't have any affect on the vehicle's performance or handling. I've linked to installation videos for both hitches mentioned above.

expert reply by: Mike L

0

Answer 1

Any trailer hitch whose receiver tube is positioned below a vehicle's rear bumper is going to reduce ground clearance and approach angle to some degree. The actual clearance lost depends on many factors including wheel/tire size, passenger and…

view full answer...

Answer 2

The EcoHitch part #306-X7203 is designed to be completely hidden behind the knockout plate so you don't have to see an unsightly crosstube underneath your vehicle. I attached a picture that I took from an install video that shows the cover…

view full answer...

Answer 3

The EcoHitch #306-X7203 has a distance of 2-1/2" from the center of the hitch pin hole to the end of the receiver and 1/2" from the center of the hitch pin hole to the back side of the receiver tube.

view full answer...

Answer 4

The EcoHitch part #306-X7203 which is a fit for your 2017 Subaru Crosstrek does have safety chain loops. They are on either side of the hitch tube. I attached a picture that has them pointed out.

view full answer...

Answer 5

What sets the EcoHitch #306-X7391 receiver apart from the other two options is that it's going to be completely hidden behind your bumper. The only portion that is visible is the 2 inch square receiver. So, if looks are important to you, this is…

view full answer...

Answer 6

Even if a trailer hitch has a higher capacity than the one you are using on your 2013 Subaru XV Crosstrek, you still need to go by the towing capacity of the vehicle as stated in the owners manual if it is lower. If the capacity of the vehicle was…

view full answer...

Answer 7

The trailer hitch we offer for your 2015 Subaru XV Crosstrek Hybrid that is the most hidden would be the EcoHitch part #306-X7203 since only the hitch opening hangs below the rear bumper. Aside from it being the most hidden it's also a really…

view full answer...

Answer 8

The EcoHitch Invisi Trailer Hitch Receiver - Class III #306-X7203 referenced in your question is confirmed to fit your 2016 Subaru Crosstrek, as long as your Crosstrek has the center knock-out panel in the lower rear fascia. As far as just installing…

view full answer...

Answer 9

Yes, the No-Drill Mount for Electrical Mounting Bracket #18140 that you referenced would fit well on the EcoHitch part #306-X7203 that you referenced. The strap would easily fit around the crosstube of the hitch and give you a secure mounting point…

view full answer...

Answer 10

You are absolutely right about the maximum 2-3/8" length required for a ball mount used with the EcoHitch #306-X7203 on your Subaru Crosstrek. For a great ball mount option for you that gives you the required length, the best option is the Rapid…

view full answer...

Answer 11

The reason why the Curt Trailer Hitch Receiver #C13135 that fits your 2017 Subaru Crosstrek requires Stabilizing Strap #18050 for accessories like bike racks but the other hitches that fit your car don't - the Draw-Tite #76084 and EcoHitch…

view full answer...

Answer 12

Your EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2" #306-X7203 on your 2016 Subaru Crosstrek does have the 2-3/8 inch limitation on the backside of the hitch pin hole when using a ball mount or other accessory. I've…

view full answer...