High Capacity Hitch for Short Bus Built on Cutaway Chassis

Question

Question:

I need a trailer hitch for my 1996 gmc g3500 cutaway van with a blue bird bus box on it looking for the highest weight rateing i can get for it

asked by: Lloyd M

0

Expert Reply:

For a cutaway chassis vehicle you could use a service body hitch like the Buyers Products Class V part # 3371801052 which has a 16,000 lb towing capacity and a 2-1/2 inch opening. This comes with 9 inch drop brackets that are adjustable in width to match the frame width of your vehicle.

expert reply by: Jameson C

0

Answer 1

On the Buyers Products hitch, part #3371801102, the mounting holes are 38-3/8 inches across center on center. Then on each side starting with the hole that's towards the rear of the vehicle they measure 3-11/16 inches from the first to the center…

view full answer...

Answer 2

Trailer hitch manufacturers have not tested trailer hitches on the Bluebird school bus built on a 2000 GMC Savana Van chassis. The issue that you could run into is that if the body of the school bus hangs lower than the regular Savana Van body the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

High Capacity Hitch for Short Bus Built on Cutaway Chassis

Product Page this Question was Asked From

Continue Researching