Does Draw-Tite Front Mount Trailer Hitch Receiver 65053 Fit 2021 Ford E-350 RV Cutaway?

Question

Question:

Will this fit a 2021 E350 stripped chassis? Its on a Thor Axis 24.1

asked by: Doug M

0

Expert Reply:

I may have an option for you, but the Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 65053 you were looking at is only a fit for the Ford E-250/350 RV Cutaway from 2008-2017 and there is not a custom fit front mount receiver confirmed to fit your 2021 Ford E-350 Thor Axis 24.1.

At this time the only option would be to use a universal receiver like the # 41990-16 and have a local fabrication shop fit it to the frame of your vehicle.

I included a video of the # 41990-16 for you to take a look at.

expert reply by: Samuel C

0

Answer 1

We sure do and for this you will want to use the Draw-Tite Front Mount Trailer Hitch Receiver part #65053 which has a 2" receiver tube opening. It also has a 9,000 lb line pull rating and a 500 lb vertical load rating. The hitch comes with a…

view full answer...

Answer 2

You will need to use a hitch mounted motorcycle carrier like the Ultra-Fab #UF48-979033 to carry your Honda Trail 125. This is required due to the weight of the Honda at roughly 250lbs. A bumper mounted rack like the Swagman #S64663 is only rated for…

view full answer...

Answer 3

When Roadmaster refers to a 10 and a 14 mm bolt, they're referring to the diameter of the threaded portion of the bolt, not the size of the bolt head or the size wrench needed to install or remove the bolt. If you measure the diameter of the…

view full answer...

Answer 4

Yes, the Front Hitch part #65053 will fit your 2017 Thor Motorhome as it was basically built on a 2017 E-450 cutaway chassis which is what this front hitch has been confirmed to fit.

view full answer...

Answer 5

I have a solution for you that I can provide, but we aren't going to have a custom fit hitch to fit a vehicle like what you referenced. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body…

view full answer...

Answer 6

Pilot diameter on a wheel like our dually trailer wheel part #AM20783 that you referenced is basically the diameter of the center hole of the wheel. This wheel has a pilot diameter of 4.75 inches. I attached a picture that shows this dimension as…

view full answer...

Answer 7

The Reese and Draw-Tite products are manufactured by the same parent company, this means that the #26102 and #26002, Dual Cam Sway Control systems are the same, but there is a difference in the generations of the systems. The older systems had Hanger…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Yes we do! The Curt Front Mount Hitch #C73ZV will be the correct hitch for your 2024 Ram 3500 Diesel Mega Cab. I just double checked with my contact at Curt and they confirmed that it will indeed fit the Diesel Mega Cab models. It will be a no drill…

view full answer...

Answer 10

We have the Draw Tite front hitch part #65053 that fits your 2022 Ford E-450 Jayco motorhome.

view full answer...

Does Draw-Tite Front Mount Trailer Hitch Receiver 65053 Fit 2021 Ford E-350 RV Cutaway?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching