What is Difference Between Curt Hitches that Fit 2021 Toyota C-HR

Question

Question:

what is the difference between C11567 and C11490?

asked by: Brad

1

Helpful Expert Reply:

For your 2021 Toyota C-HR the two hitches are basically the same which is very interesting but the difference between them is very subtle which allows the # C11490 to fit all models of the 2018 to 2021 Toyota C-HR whereas the # C11567 happens to also fit the 2019 through 2021 Toyota Corolla hatchbacks as well as the C-HR models. So honestly Curt probably should have just the one part number but they have both.

expert reply by: Jameson C

1

Answer 1

We do carry a hitch for a 2021 Toyota Corolla Hatchback! It's the Curt Class I, part #C11567. This hitch has a 1-1/4" receiver with a tongue weight capacity of 200 pounds and 2000 pounds of towing capacity. I've linked to a video…

view full answer...

Answer 2

Curt trailer hitch #C11567 is a confirmed fit for the 2018 Toyota C-HR. There is no drilling required for installation. I have included a video of this hitch being installed on a 2018 Toyota C-HR. I hope this will help. If you want to use the hitch…

view full answer...

Answer 3

The Curt Trailer Hitch Receiver part #C11567 and part #C11490 which are both fits for a 2019 Toyota C-HR are the same for intents and purposes. I recommend going with whichever is more cost effective at the time. The former hitch however is…

view full answer...

Answer 4

Yes the Curt hitch part #C11567 fits all models of the 2018 Toyota C-HR so it does fit yours as well!

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

What is Difference Between Curt Hitches that Fit 2021 Toyota C-HR

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching