Hitch Solution to Carry E-Bike Rack for 2021 Coachman Freedom Express Ultra Lite 192 RBS

Question

Question:

I have a 2021 coachman freedom express ultra lite 192 rbs. What hitch do you recommend for putting on the back of it to hold the bike rack for my 2 e bikes it needs to be a 2 “ receiver.

asked by: Glenn L

0

Expert Reply:

Our best hitch solution for an RV like your 2021 Coachman Freedom Express Ultra Lite 192 RBS to carry an e-bike rack would be the Curt # 13703 that you referenced as this is a universal fit style hitch that fits standard frame widths between 22 and 72 inches and also has a 350 lb tongue weight capacity.

expert reply by: Jameson C

0

Answer 1

The Adjustable Width Trailer Hitch Receiver for RVs part #13703 is what I recommend for a Grand Design Solitude. It features a 3,500 lb gross trailer weight capacity and 350 lb tongue weight rating. This will be the most offered for a trailer as…

view full answer...

Answer 2

The puck feet on the Gen-Y Hitch Gooseneck Trailer Hitch for Dodge Ram OEM Puck Systems #GY83XR is just to help stabilize the ball mount and does not lock into place in the puck. The locking mechanism on top will lock the shank into the gooseneck…

view full answer...

Answer 3

If your Micro Minnie has a 4 inch x 4 inch channel bumper, I'd recommend the Curt #E-100. If you'd prefer a frame mounted hitch, I'd recommend the Curt #13703, which is compatible with box, C-channel or I-beam frames that are between 22…

view full answer...

Answer 4

The center to center measurement of the mounting bracket bolt-holes for the Stromberg Carlson Adjustable Accessory Hitch Receiver #SC45MR is 5-7/8". Additionally, there are two other bolts holes on the angle brackets that measure 3-1/8"…

view full answer...

Answer 5

You will need to use a hitch mounted motorcycle carrier like the Ultra-Fab #UF48-979033 to carry your Honda Trail 125. This is required due to the weight of the Honda at roughly 250lbs. A bumper mounted rack like the Swagman #S64663 is only rated for…

view full answer...

Answer 6

Yes, if you plan on bolting the Stromberg Carlson Adjustable Accessory Hitch Receiver #SC45MR on then you would need to drill holes in the adjustable arms in order to set them to the correct length. There aren't any predrilled so that this one…

view full answer...

Answer 7

The available trailer hitches for the 2016 Ford Transit T350 are not designed to fit the cab and chassis/cut away models but we do have options that you could use. The most popular option is #13703. It can actually be bolted on or welded on. Welding…

view full answer...

Answer 8

For your 2018 Coachman Freedom Express 19 foot travel trailer, I recommend the Curt Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide #13703. This is for use with accessories only and is not for trailer use. It is a bolt-on…

view full answer...

Answer 9

You should contact Coachman and ask how many pounds their rear bumpers are rated for. Most are not rated for any weight. Small trailer bumpers are notorious for falling off as you travel down the road if loaded. IF it is rated for a few hundred…

view full answer...

Answer 10

The Lippert Jack-It bike rack, part #LC429756 fits most jacks as long as they have an outer tube up to 2-1/4 inches in diameter and 22-1/2 inches of clearance above the trailer frame. The #LC285318 would be a good choice for a trailer jack. With its…

view full answer...