Distance Between Mounting Holes On Curt Trailer Hitch Receiver 13138

Question

Question:

Please advise distance between mounting bolts. from chassis mount and top of receiver box. Thank you,

asked by: Matt S

0

Expert Reply:

The Curt Trailer Hitch Receiver # 13138 you were looking at measures 30-3/4" between the two furthest back mounting holes center to center, 31" between the two closer mounting holes center to center, and 5-3/4" between the holes vertically as shown in the included diagram.

From the mounting flange to the top of the receiver tube measures 5-1/2".

The # 13138 is a custom fit for the 1983-2012 Ford Ranger and 1994-2010 Mazda B Series Pickups, so as long as your vehicle is one of these models it will fit perfectly. If you have a different vehicle, just let me know the Year/Make/Model and I would be happy to recommend a hitch for you.

I included a video of the # 13138 being installed for you to take a look at.

expert reply by: Samuel C

0

Dimensions Of Curt Trailer Hitch Receiver # 13138
(click to enlarge)

Answer 1

Curt trailer hitch #13138 will fit all models of the 1997 Ford Ranger except the GT models. So it will fit your stepside model as long as it is not a GT. I have linked the instructions and a video showing a typical installation for you. If you plan…

view full answer...

Answer 2

I'd be happy to help with that. The Curt Class III hitch, part #13138 is a fit for the following vehicles: • 1994 - 2010 Mazda B Series Pickup • 1983 - 2012 Ford Ranger • 1986 - 1989 Ford Ranger excluding GT Replacement Hardware is available…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 12

You'd need a new panel like the Progressive Dynamics Mighty Mini part #PD4045KA which is the most similar to your Parallax 7345 except is Lithium battery compatible. There isn't a center section replacement available for what you have that…

view full answer...

Distance Between Mounting Holes On Curt Trailer Hitch Receiver 13138

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching