Will Blue-Ox Base Plate Kit Fit Jeep with Warn Elite Full Width Bumper

Question

Question:

2011 Jeep JK Sport with Warn Elite Full Width Bumper Will the BX1126 fit under the warn Elite bumper? Is there a drawing that shows the dimensions of the BX1126? Thanks

asked by: JOHN G

0

Expert Reply:

I wouldn't be able to confirm fit of a base plate kit with the Warn Elite Full Width Bumper but since it has d-rings you can use the Blue Ox Aftermarket Off-Road Bumper Adapter part # BX88357 for 7/8" pins or part # BX88358 for 1" pins.

expert reply by: Conner L

0

Answer 1

As long as the Warn Elite front bumper you are looking at has the 1 inch D-ring you can use the #BX88358 or if they are 7/8 inch you'd instead need the #BX88357. In addition to the base plates, you will also need a compatible tow bar, safety…

view full answer...

Answer 2

The Blue Ox tow bar adapter that will fit your new EAG JJKFB021 Bumper are the Blue Ox Aftermarket Off-Road Bumper Adaper - 7/8 Inch Pin #BX88357. I was able to confirm that the d-rings on your aftermarket bumper use a 7/8 inch pin and have a 1 inch…

view full answer...

Answer 3

Based on the information you have given me you have the Roadmaster Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars #RM-035 or #RM-035-1. Since you want to stick with Roadmaster parts, the correct replacement pin is the…

view full answer...

Answer 4

The adapter you mentioned #BX88358 will work for you as we have checked with Blue Ox and this can fit tab widths of 3/4 inch wide, 7/8 inch wide, and 1 inch wide with 1 inch diameter pin holes. The distance between the arms is 1 inch.

view full answer...

Answer 5

We have what you need. I will list them below for you. The Blue Ox Aftermarket Off-Road Bumper Adapter - 7/8" Pin #BX88357 for your 1 inch D-rings. The etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates - RV Mount - 2" Hitch - 6,000…

view full answer...

Answer 6

In order to choose the correct Blue Ox Aftermarket Off-Road Bumper Adapter for an aftermarket bumper you'll need to measure the d-ring shackle thickness and pin diameter. The max thickness is 1". There is then the part #BX88357 for 7/8"…

view full answer...

Answer 7

If you do not have a 7/8" pin and need a larger one, you will need the Blue Ox Aftermarket Bumper Adapter - 1" Pin #BX88358. This includes pins, clips, washers, and lock nuts and will get you the clearance needed to fit your Smittybilt XRC…

view full answer...

Answer 8

You can definitely use the Blue Ox Aftermarket Off-Road Bumper Adapter - 7/8" Pin #BX88357. The 1/16" space you were talking about is not too much play, it is such a small amount it won't be impactful. Drilling the holes out is not…

view full answer...

Answer 9

I do have an option for you but the Roadmaster Direct-Connect Base Plate Kit part #RM-521448-5 is designed to be used with the factory front bumper on a 2018 Jeep JK Wrangler only. Unfortunately, Roadmaster does not test this base plate kit with…

view full answer...

Answer 10

The Smittybilt XRC Gen2 bumper on the 2020 Jeep Wrangler has 3/4" thick d-rings so you can use the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars part #RM-035 to tow with the D-rings on your bumper. Smittybilt is…

view full answer...

Answer 11

No, you can't. Those hooks are only for recovery or pulling something they're not rated to be flat towed with. You are actually going to have to remove them to install a base plate kit on your 2023 Ford Bronco. Since you have a Blue Ox Alpha…

view full answer...

Answer 12

Hey Kyle, happy to help out a fellow namesake, and we can indeed get your 2024 Jeep Wrangler set up to be flat towed with your Rugged Ridge Arcus front bumper and the Blue Ox Avail Non-Binding Tow Bar #BX7420. I did some research and it looks like…

view full answer...