Is There a Blue Ox D-Ring Adapter for a Smittybilt XRC Gen2 Bumper

Question

Question:

Hello, Im looking for a Blue Ox D-Ring Adapter for a Smittybilt XRC Gen2 bumper. The Gen2 bumpers have an additional ring above that does not allow upward travel with the normal Gen1 style. The Tabs need to be longer and 1inch pins. Thanks

asked by: Chris

0

Expert Reply:

If you do not have a 7/8" pin and need a larger one, you will need the Blue Ox Aftermarket Bumper Adapter - 1" Pin # BX88358. This includes pins, clips, washers, and lock nuts and will get you the clearance needed to fit your Smittybilt XRC Gen2 bumper.

expert reply by: Lazer S

0

Answer 1

You are correct. You will need an adapter to use the Blue Ox Aladdin tow bar with the Smittybilt XRC Atlas bumper. We have exactly what you need. It is adapter #BX88357.

view full answer...

Answer 2

To determine if your motorhome has the Tiffin air brake setup or Freightliner BrakeSync you'll need to look at the rear and see if there's an quick disconnect fitting for your air line. The standard Tiffin air coupler fitting would look like…

view full answer...

Answer 3

The Smittybilt XRC Gen2 bumper on the 2020 Jeep Wrangler has 3/4" thick d-rings so you can use the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars part #RM-035 to tow with the D-rings on your bumper. Smittybilt is…

view full answer...

Answer 4

To flat tow your Jeep Wrangler JK behind your motorhome, you will need a base plate kit, tow bar, safety cables, tail light wiring harness, and a supplemental braking system. Depending on the year of your Wrangler, you may also need a Brake-Lite…

view full answer...

Answer 5

We do carry the adapters you are looking for so you can tow your Jeep with the Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar #RM-422. The part you need is the Adapter for Extended D-Ring Bumper Mounts to Roadmaster Motorhome Mounted Tow…

view full answer...

Answer 6

The Mopar RV tow wiring harness 82211156AB you referenced is a fit for 2007-2018 JK Wranglers. If that is what you have, then you can use the Roadmaster InvisiBrake Supplemental Braking System #RM-8700 but you will need to splice into the harness. My…

view full answer...

Answer 7

One end of the umbilical cord that comes with the Brake Buddy Stealth Supplemental Braking System part #HM39530 is a 7-blade round connection that connects to motor home's 7-way plug. The other end is a 7-flat connector that plugs into the…

view full answer...

Answer 8

Actually, I'd recommend the Roadmaster #RM-077-2 Dual Hitch Receiver you'd already looked at. This adapter is specifically designed for flat towing a vehicle, so it won't lower the capacity of your hitch. If the 2-1/4 inch drop will place…

view full answer...

Answer 9

We don't have a confirmed fitting baseplate for a Smittybilt XRC bumper, but since it has a D-Ring mounts you could reach out to Smittybilt and see if this bumper is rated for towing from the D-Rings. If so then you would just need to measure the…

view full answer...

Answer 10

Since you have 3/4 inch thick D-rings you need the part #BX88357 since you have a Blue Ox tow bar. If you had a Roadmaster tow bar instead you'd want the #RM-035.

view full answer...

Answer 11

Yes, you can flat tow your 2020 Jeep Wrangler with the SmittyBilt XRC front bumper. For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a…

view full answer...

Answer 12

Most replacement bumpers out there for your 2016 Jeep Wrangler Unlimited like the Bestop HighRock part #B4291001 that you referenced aren't rated for use with a tow bar. There are some aftermarket bumpers that do have this ability but we do not…

view full answer...

Is There a Blue Ox D-Ring Adapter for a Smittybilt XRC Gen2 Bumper

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching