Can Cargo Carrier in Class II Hitch Carry 135 lb Mini Bike

Question

Question:

I have a 135lb coleman minibike BT200X Im looking to transport with the Curt class II hitch for my Scion XB. Could this work for an application like this?

asked by: Nicole E

0

Expert Reply:

You can use a cargo carrier like the part # 63155 to carry your 135 lb minibike in your Class II hitch. This carrier only weighs 44 pounds. So the total weight would keep you under a 200 lb tongue weight.

expert reply by: Jameson C

0

Answer 1

The Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 60" Long - 2,200 lbs #T20BTR-EZ-6048 will fit any trailer with spring seats 48 inches on center. If you Harbor Freight trailer has leaf springs that are 48 inches on center then you…

view full answer...

Answer 2

We do carry two axles that are galvanized. We offer part #CE33201GA-HUB. This is a 57-1/2 inch long hub face to hub face straight axle with 5 on 4-1/2 idler hubs. The weight capacity for this axle is 1,800-lbs. The overall beam length is 62 inches.…

view full answer...

Answer 3

Since you want to change your trailer hubs to the 5-on-4-1/2 bolt pattern I suggest you select a 60-inch axle kit that includes idler hubs, such as one of the two kits shown on the linked page. These two 2K-rated axle kits include 5-on-4-1/2 hubs,…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 6

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 7

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...

Answer 8

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 9

Yes, the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers #AL88211 comes with two separate Schrader valves so that you can air up each air spring individually. If you're also looking for a dual path on-board…

view full answer...

Answer 10

To correctly measure a leaf spring, you'll want to jack the trailer up on jack stands so the axle is hanging freely, then measure directly across from the center of one spring eye to the other, as shown in the provided diagram. The height of the…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...