Correct Top Strip for Thule TracRac SR Ladder Rack

Question

Question:

Will this strip fit the Trac Rac TH43001XT. If not what filler strip fits this rack. The top and bottom T-slots are different widths.

asked by: Doug D

0

Expert Reply:

The correct top strip for the TracRac SR ladder racks is the part # TARX-12007-1 and the Thule # TH853354407 would not work.

expert reply by: Jameson C

0

Answer 1

Hey Jason, I double checked with my contact at Thule and turns out you were right. The only difference is that the #8542526002 has a shallower top T-channel than the #TAFX-30007-02. Aside from that they are identical in size and length at…

view full answer...

Answer 2

I went down to the shop and double checked the crossbars and found that Thule made the mounting track on the bottom of the crossbar for the Thule TracRac TracONE Truck Bed Ladder Rack #TH27000XTB just different enough that it won't allow you flip…

view full answer...

Answer 3

The replacement crossbar part #TAFX-30007-02 fits the Thule TracRac Cantilever extensions like the part #TH24001XT sso this would be what you'd need.

view full answer...

Answer 4

We have a rubber wear strip that is designed to fit the top channel of the TracRac ladder rack crossbars as part #TARX-12007-1 which is 30 inches long. As far as a roller though we do not have anything that fits the bars that would work for this.

view full answer...

Answer 5

Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has 1/2-inch studs and…

view full answer...

Answer 6

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 7

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 8

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 9

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 10

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 11

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 12

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Correct Top Strip for Thule TracRac SR Ladder Rack

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching