Correct Fat Tire Adapter Kit for Hollywood Racks HR1450Y-E Bike Rack

Question

Question:

I bought a Hollywood HR1450Y-E rack from your company 3 or 4 years ago and I want to adapt it for a fat tire e-bike. Is the HRSPRWH-F-HD the correct adapter kit for this rack?

asked by: Ken Z

0

Expert Reply:

Yes, the Fat Bike Adapter Kit part # HRSPRWH-F-HD works with the Hollywood Racks Sport Rider HR1450Y-E.

expert reply by: Conner L

0

Answer 1

When comparing the Curt #C24HR, etrailer #e93ZR, and Draw-Tite #DT85MR there are very few differences. All three hitches have a 2" receiver and the same maximum gross towing weight of 3,500 lbs and tongue weight of 525 lbs. The Curt and etrailer…

view full answer...

Answer 2

The adapter kit you are looking for is the following: - Universal Wheel Holder Kit for Hollywood Racks Sport Rider E-Bike Rack #HR89FR This adapter kit will work for fat tires up to 5 inches wide.

view full answer...

Answer 3

I would be happy to clear this up! The bike rack you ordered back in 2018 is indeed the Hollywood Racks Sport Rider HR1450 with no letter. This was discontinued by the manufacturer and updated. However my contact at Hollywood Racks confirmed that the…

view full answer...

Answer 4

We only have one bike rack solution that has the capacity needed for a 77 lb bike. For that you'd want the Hollywood Racks Sport Rider SE2 2-Electric Bike Platform Rack #HR1450Z-E which has an 80 lb per bike capacity. You'd also need the fat…

view full answer...

Answer 5

Both of those parts are members of the Hollywood Racks SportRider family of bike racks, so you can use the Fat Bike Adapter Kit for Hollywood Racks Sport Rider E-Bike Rack #HRSPRWH-F-HD to adapt your rack to carry fat tire bikes. These come as a pair…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

There is a trailer hitch receiver as well as a 4-way wiring harness that fit your 2022 Jeep Grand Cherokee WL; that said, we don't have any way to reference a VIN so you'll need to confirm if you do have the WL, which is the new model of…

view full answer...

Correct Fat Tire Adapter Kit for Hollywood Racks HR1450Y-E Bike Rack

Continue Researching