Which Fat Tire Adapter for Hollywood Racks SportRider Bike Rack

Question

Question:

According to my manual I have either the 1450Z-E or 1455Z-E Ebike rack. I need to know which Fat tire adapter fits these.

asked by: Bruce K

1

Helpful Expert Reply:

Both of those parts are members of the Hollywood Racks SportRider family of bike racks, so you can use the Fat Bike Adapter Kit for Hollywood Racks Sport Rider E-Bike Rack # HRSPRWH-F-HD to adapt your rack to carry fat tire bikes. These come as a pair of hoops for a single bike, so you'll need one of these for each bike you need to carry that has fat tires.

I've linked a short review and installation video of these for you to check out, as well.

expert reply by: Erik B

1

Answer 1

The adapter kit you are looking for is the following: - Universal Wheel Holder Kit for Hollywood Racks Sport Rider E-Bike Rack #HR89FR This adapter kit will work for fat tires up to 5 inches wide.

view full answer...

Answer 2

I would be happy to clear this up! The bike rack you ordered back in 2018 is indeed the Hollywood Racks Sport Rider HR1450 with no letter. This was discontinued by the manufacturer and updated. However my contact at Hollywood Racks confirmed that the…

view full answer...

Answer 3

Yes, the Fat Bike Adapter Kit part #HRSPRWH-F-HD works with the Hollywood Racks Sport Rider HR1450Y-E.

view full answer...

Answer 4

We only have one bike rack solution that has the capacity needed for a 77 lb bike. For that you'd want the Hollywood Racks Sport Rider SE2 2-Electric Bike Platform Rack #HR1450Z-E which has an 80 lb per bike capacity. You'd also need the fat…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

I have a solution for you. Here at Etrailer, we strongly discourage using wheel-mounted bike racks like the Kuat NV 2.0 #NV22B for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with the…

view full answer...

Answer 8

The RockyMounts MonoRail bike rack you'd looked at, part #RKY10004 is a great bike rack, but it wouldn't work well with bikes that have fenders like your Aventon Aventure Fat tire ebikes. The front fender would prevent the bike retaining hook…

view full answer...

Answer 9

Yes, it does. The Hollywood Racks LED Light Bar item #HLY54RR is wired for a 4-way but comes with an adapter that will plug into a 7-way like yours to power the lights.

view full answer...

Answer 10

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 11

Hello Jason, I just looked up those Finn Golf Scooters those things are pretty sweet. We do have a potential solution for carrying a Finn Golf Scooter, but there are no Thule products I am aware of that will work for this. Your best option for this…

view full answer...

Answer 12

For a 70 lb E-bike with fat tires we really only have one option that will work well. That's the Hollywood Racks #HLY84FR that has a weight capacity of 80 lbs per bike and can accommodate tire widths of up to 5 inches. It can also carry up to two…

view full answer...

Which Fat Tire Adapter for Hollywood Racks SportRider Bike Rack

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching