Ladder Roller that Can Fit Top Channel of Thule Ladder Rack

Question

Question:

I have a Thule xporter pro rack and am in need of a roller assist. Ive heard that these can work. Does the hardware provided work, or is there another option? Im looking for 48-54 Thank you

asked by: Eric B

0

Expert Reply:

The ladder roller we offer that will fit the top channel of a Thule Xsporter is the Yakima part # Y01163 which is shorter than what you mentioned wanting but you could use two of these to get the length you need. The roller of this is 24 inches long.

expert reply by: Jameson C

0

Answer 1

The Yakima Ladder Roller part #Y01163 will fit the top channels of TracRac TracOne ladder racks like you have.

view full answer...

Answer 2

Since the Thule Roof Rack Roller #TH39PF just mounts into the t-slots on the Thule ProBar you'll have no issues fitting it to your Thule TracRac since they have the same t-slot dimensions.

view full answer...

Answer 3

If the square bars were the Rhino Rack HD crossbars that have channels that along the top of them yes the Ladder Roller for Rhino-Rack Heavy-Duty Crossbars #RR1500 would work. If they are standard square bars like from Thule it would not work.

view full answer...

Answer 4

I spoke to my contact at Rhino Rack and he informed me that the length of the roller on the Rhino Rack Ladder Roller #RR1500 that you referenced is 56-1/4 inches. Check out the picture I attached to see this measurement.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...