TorkLift Frame-Mounted Camper Tie-Downs for 2021 Chevrolet Silverado 3500

Question

Question:

TORQUE LIFT FRAME MOUNTS FOR A 2021 SILVERADO. TORQUE LIFT SAYS C2226 AND C3221. E-TRAILER SAYS TL44FR AND TLC3221. ARE THE BOTH THE SAME.

asked by: Mike G

0

Expert Reply:

Yes, our TorkLift # TL44FR and # TLC3221 are the same as TorkLift C2226 and C3221. For most of our items, if you scroll down the page a bit it will show the manufacturers original part number.

Be sure to use the fit guide as some are different based on; bed length, Single or Dual tires, running board style, and hitch brand. If you would email me this information about your truck I can sort this out.

expert reply by: Les D

0

Answer 1

For your 2020 GMC Sierra 2500HD Crew Cab I recommend using product #TLC2225 for the front tie down and product #TLC3221 for the rear tie down on a 6-3/4 foot bed. If your bed is 8 foot then I recommend product #TL44FR for the front tie down and…

view full answer...

Answer 2

I went out to our warehouse to take a measurement on the brackets for the Pilot Truck Tailgate Net #TR-03 referenced in your question and found that each bracket will extend 3/8 of an inch out from the inside wall of your tailgate. As long as you…

view full answer...

Answer 3

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 4

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 5

Yes you can absolutely use the HappiJac Qwik-Load Turnbuckles for Camper Tie-Downs #LC182895 with your TorkLift tie downs.

view full answer...

Answer 6

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 7

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

view full answer...

Answer 8

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

view full answer...

Answer 9

When a camper is loaded on a pickup truck bed there will be a gap between the truck bed rails and the underside of the camper as you show in your photo. No worries there. For your camper tie-downs, it loos as though you have attached the rear ones…

view full answer...

Answer 10

Hey Robert, sorry it can be a bit confusing navigating all those facets for the camper tie downs, but I did go ahead and find those tie downs you were looking for. For the front, you'll want the TorkLift Camper Tie-Downs #TL87CR (TorkLift P/N…

view full answer...

Answer 11

Yes, the #TLD2142 is exactly what you need for your 2019 Ram 3500 with running boards extending under the truck bed. For the rear, you need the #TLD3112 if you have the factory hitch or #TLR3510 if you have the TorkLift SuperHitch Magnum 30K.

view full answer...

Answer 12

For your 2020 Chevy Silverado 2500 with 6-3/4 foot bed, the front #TLC2225 and rear tie down #TLC3221 are the correct fit for your truck. Whether you have the double cab or the crew cab and whether you have running boards or not these are the…

view full answer...

TorkLift Frame-Mounted Camper Tie-Downs for 2021 Chevrolet Silverado 3500

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching