Using the C57003 with the Echo Brake controller

Question

Question:

I just ordered the C57003 to work in tandem with my Echo brake controller on with my 2014 Audi Q7 towing a Trailex trailer with LED lights. What is the sequence of using the devices? For example, do I plug the C57003 into the car receiver, plug the echo into that, wait for the echo to sink with the car hopefully see the blue lights for the first time and then connect the trailer to the echo?

asked by: Jason C

0

Expert Reply:

You will want to plug the # C57003 adapter into your 7 pole on your vehicle then plug the Curt Echo # C51180 into the adapter. The trailer plug should always be plugged directly into the Echo so that there is no interference with other adapters.

expert reply by: Jacob H

0

Answer 1

That would indicate there is something wrong with your trailer wiring most likely. You need to verify that both stop/turn signal circuits on your vehicle 7-way are working like they should. These are the circuits that tell the Curt Echo Mobile…

view full answer...

Answer 2

I reached out to my tech contact at Curt and the Echo #C51180 wireless controller having this issue is likely due to some bleed over from your 7-way. I recommend starting there using sand paper or steel wool to clean each of the blades on both the…

view full answer...

Answer 3

I would be happy to help you fix your Curt Echo item #C51180. First you will need to completely unplug the Echo from both trailer and truck, delete the app from your phone, reinstall the app, and then plug the Echo into the vehicle 7-way (by itself)…

view full answer...

Answer 4

The blue light on the LED indicator of the Curt Echo Brake Controller part #C51180 that you referenced indicates that the controller is paired to a phone but a trailer is not connected. See attached picture that shows what all of the colors indicate.…

view full answer...

Answer 5

There are two different locations for your PIN for the Curt Echo Wireless Trailer Brake Controller - 1 to 2 Axles - Proportional #C51180. One is under the cap on the Echo itself. The other is on the quick reference card that came with the Echo. This…

view full answer...

Answer 6

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 11

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Using the C57003 with the Echo Brake controller

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching