Can Roadmaster Sterling be Ordered without Safety Cables

Question

Question:

Is it possible to purchase the RM Sterling Tow Bar with hook and loop safety cables instead of the cables it comes with? I want to use it with a RM EZ-5 52357-5 Baseplate direct connect. Im assuming the crossbar on the tower disconnects Thanks

asked by: Stacia

0

Expert Reply:

The Roadmaster Sterling # RM-576 is only available with the straight safety cables but we do have the similar Roadmaster Blackhawk # RM-422 which does not have cables so you could use coiled cables like the # RM-653.

expert reply by: Jameson C

0

Answer 1

The Roadmaster 80" Coiled Safety Cables - Double Hook part #RM-653 has a capacity of 10,000 lbs as a pair. They are designed for flat towing a vehicle. If you need more weight capacity in a cable, I recommend Demco coiled safety cables part…

view full answer...

Answer 2

On the Blue Ox 3 Foot Safety Cables - 10,000 lbs - Qty 2 #BX88208, I reached out to my contact at the manufacturer and the 10,000 lb rating is for each cable. This is not rated on what they are able to tow. They don't have a rating for working…

view full answer...

Answer 3

We do offer tow bar setups that can attach to the D-rings on the Warn Elite Bumper. Your will need to use a D-ring adapter to connect the tow bar. For the adapter you have the following options: 1" Thick D-Rings #RM-035-1 3/4" Thick D-Rings…

view full answer...

Answer 4

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 5

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 6

To flat tow your Jeep Wrangler JK behind your motorhome, you will need a base plate kit, tow bar, safety cables, tail light wiring harness, and a supplemental braking system. Depending on the year of your Wrangler, you may also need a Brake-Lite…

view full answer...

Answer 7

The actual locking mechanism is the difference. The Trimax Heavy Duty #TMX42ZR has a much more robust hardened steel lock while the Trimax #TMX65FR uses a tube key style lock for the main lock.

view full answer...

Answer 8

There are a few differences between the Demco Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor #DM86VR and the Roadmaster InvisiBrake Supplemental Braking System #RM-8700. The biggest difference between the two is…

view full answer...

Answer 9

I have a solution for you, however, I would not recommend mounting a tow bar directly to a bumper on a Jeep, whether it is OEM or an aftermarket bumper. Jeep does not recommend towing the Wrangler with the OEM bumper because it was not designed to…

view full answer...

Answer 10

What you need is a light kit specifically for flat-towing. The Plug-N-Tow TM Vehicle Wiring Harness, #42615, would be if the Jeep were towing a trailer and not for activating its lights while it is being towed. There are a few options for lighting…

view full answer...

Answer 11

Hello Curtis. You can absolutely use an RV mount tow bar with your 2006 Ford E350 Van. For example, the Blue Ox Avail Non-Binding Tow Bar #BX7420 is compatible with any 2" hitch receiver. This could be on a motorhome, van or pickup truck. As…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...