Replacement Red and Amber Lens for Clearance Light MCL31RB

Question

Question:

Do you have replacement lens for the optronics MCL31RB and AB?

asked by: Keith O

1

Helpful Expert Reply:

Yes, the replacement lens you would want for your # MCL31RB is the part # A31RB. And the amber version is part # A31AB.

expert reply by: Jameson C

1

Answer 1

See the picture to the right for a wiring diagram of seven-way vehicle end trailer connector. If you click on it you can enlarge it. I have also included a trailer wiring FAQ page for you to check out.

view full answer...

Answer 2

According to my research, the Bargman 552 is an oval amber clearance light that measures 3 7/8" long x 1 7/8" wide x 7/8" tall. We do not have an exact replacement for this light but we do have something very close in the Oval LED…

view full answer...

Answer 3

I was not able to find specs for the marker lights supplied on your Trailer Star boat trailer but I was able to find several photos that show the red oval grommet-mount lights you refer to. There may be a part reference number on the back of the…

view full answer...

Answer 4

The Replacement Amber Lens for Peterson Oval Clearance and Side Marker Lights #108-15A looks to be a close match and it measures 3-3/4" long x 1-5/8" tall x 15/16" deep so it should work just fine.

view full answer...

Answer 5

For an exact replacement to what you sent in a picture of we have the part #MCL31RB for a red taillight and part #MCL31AB for an amber light.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...