Rhino Rack Pioneer Platform that Fits Universal Crossbars

Question

Question:

If I want to purchase a pioneer rhino rack platform and Mount it to aero crossbars, can this be done with this platform rack or do I need a different brand ?

asked by: Tiffany L

0

Expert Reply:

Rhino Rack offers versions of their Pioneer Platforms that fit aero bars with the part # RR42114BF for a 48 inch by 38 inch platform or the part # RR42115BF which is 58 by 47 inch.

expert reply by: Jameson C

0

Answer 1

The Rhino-Rack Sunseeker Awning, part #RR32133, mounts to either the Rhino-Rack Pioneer Platform or the T-slots of other crossbars. Your 2017 Honda CR-V with factory crossbars do not have T-slots, so your only option is to attach a Pioneer Platform.…

view full answer...

Answer 2

I have a great solution for you. Unfortunately, the Rhino-Rack Pioneer Platform #RR45TB does not fit your Yakima HD Crossbars. The reason why is because Rhino-Rack does not make compatible feet or fit kits designed to work with this platform and the…

view full answer...

Answer 3

Yes. You can use the inner channels on the Rhino-Rack Universal Platform Rack #RR42115BF to mount the clamps, but this cannot be done on the #RR42114BF - per my contact at Rhino-Rack.

view full answer...

Answer 4

Thanks for the picture! The Rhino-Rack Universal Pioneer Platform Rack for Crossbars Item #RR42115BF will fit your Garvin Expedition crossbars if they are less than 3-5/8" wide. I have attached a couple of videos that demonstrate how this…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 7

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 8

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 9

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 10

Normal operating temperatures for drum brakes range from 150-400 degrees F. During certain stopping conditions the brake heat can exceed 600 degrees. The effectiveness and stopping power of the brakes is significantly reduced at these higher…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Rhino Rack Pioneer Platform that Fits Universal Crossbars

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching