Coil Suspension Enhancement Recommendation for 2018 Ford Expedition

Question

Question:

Im looking for an air bag suspension kit to fit inside the factory coils of a 2018 Ford Expedition Max with a FX4 package and heavy duty trailer option.

asked by: Zach

0

Expert Reply:

For your 2018 Ford Expedition 4 wheel drive we have the Coil SumoSprings part # CSS-1168 which fits in between the coils like you are wanting and provides additional support.

expert reply by: Jameson C

0

Answer 1

For your 2018 Ford Expedition, the Coil SumoSprings Custom Helper Springs for Coil Spring Suspension - Front or Rear Axle #CSS-1168 is the correct product for you. This will help you when towing your RV. It is easy to install so you can do it…

view full answer...

Answer 2

All 3 options are the same Coil SumoSprings: #CSS-1168 #CSS-1168R #CSS-1168F The difference in the part numbers just has to do with R is for rear, F is for front and then we have the regular number in case someone is looking for the part to fit a…

view full answer...

Answer 3

For your 2020 Ford Expedition the SumoSprings kit part #CSS-1168 is the best solution for rear suspension enhancement. This will work great with your weight distribution setup as well.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is comfortability when you…

view full answer...

Answer 10

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…

view full answer...