Do 2016 Chevy Cruze LS and Limited Have the Same Hitch Fits

Question

Question:

2016 Chevy Cruze LS have the same hitch part as the limited model

asked by: Kevin S

0

Expert Reply:

The hitches that are confirmed to fit a 2016 Chevy Cruze LS and Limited are different part numbers. The profile and mounting location of the hitches for these two trim models are vary significantly.

We have the 2016 Chevy Cruze Limited listed separate fit guide listing, as if it is a different vehicle all together, not just a different trim model.

I have included a link to the hitches that are confirmed as a fit for each vehicle listing. There are two hitches for each vehicle listing. For the 2016 Cruze LS the part hitches that are confirmed as a fit are the # 24943 and the # C11439. For the 2016 Cruze Limited the hitches that are a fit # 24882 and # C11425.

expert reply by: Rachael H

0

Answer 1

Often times there are different ways to modify the heat shield of a vehicle when installing a hitch like the Curt #C11439 on your 2018. Typically our manufacturers recommend the simplest way to modify it but going a different route can work well. We…

view full answer...

Answer 2

The Curt Trailer Hitch Receiver part #C11439 which is a fit for a 2016 - 2019 Chevrolet Cruze weighs around 30 lbs.

view full answer...

Answer 3

I attached a picture that shows how much of the Curt hitch part #C11439 will hang below the bumper of a vehicle it is installed on. Basically you will only see the hitch opening.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...