How is the Length of a Ball Mount Measured
Question:
When your item description states 9.5 length for a ball mount for a 2.5 reciever is it total length overall, end to pin hole, ball hole ? Also do you have hitch extension for a truck with a 2.5 receiver that is just a straight length of 2.5 tubing that will accept a 2 ball mount. That could be used without any other adapters.
asked by: Tim P
Helpful Expert Reply:
The length of a ball mount like the Draw-Tite Ball Mount for 2" Hitch - 7" Rise, 8" Drop - 9-1/2" Long - 12,000 lbs # 4283 is measured from the center of the hitch pin hole to the center of the ball mount hole. This particular ball mount is 9-1/2" long from the center of the hitch pin hole to the ball mount hole.
In regards to your second question you could use the Brophy Hitch Reducer and Extender - 2-1/2" to 2" Trailer Hitch - 7" Long # HR26 but it would reduce your tongue weight by 1/3 of the capacity; for that reason your best bet to reduce your 2-1/2" would be just to use a reducer sleeve that fits inside the receiver like the Gen-Y # 325-GH-007.
Products Referenced in This Question
Gen-Y Hitch Reducer Sleeve - 2-1/2" to 2" - 5-1/2" Long
- Hitch Adapters
- Hitch Reducer
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- No Extension
- Fits 2-1/2 Inch Hitch
- 2-1/2 Inch to 2 Inch
- Gen-Y Hitch
more information >
Brophy Hitch Reducer and Extender - 2-1/2" to 2" Trailer Hitch - 7" Long
- Hitch Adapters
- Hitch Extender
- Hitch Reducer
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- Trailers
- 7 Inch Extension
- Fits 2-1/2 Inch Hitch
- 2-1/2 Inch to 2 Inch
- 5000 lbs
- Brophy
more information >
Product Page this Question was Asked From
Draw-Tite Ball Mount for 2" Hitch - 7" Rise, 8" Drop - 9-1/2" Long - 12,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Silver
- Drop - 8 Inch
- Rise - 7 Inch
- Fits 2 Inch Hitch
- 12000 lbs GTW
- Class IV
- Draw-Tite
more information >
Continue Researching
- Article: Hitch Adapters and Extenders
- Search Results: receiver collar
- Shop: Gen-Y Hitch Reducer Sleeve - 2-1/2" to 2" - 5-1/2" Long
- Shop: Trailer Hitch Reducer and Extender - 2-1/2" to 2" Trailer Hitch - 7" Long
- Shop: Center Section for B&W Turnoverball Underbed Gooseneck Hitch - 30,000 lbs
- Q&A: Replacement 2-1/2 to 2 Adapter Sleeve for TorkLift SuperHitch Magnum Trailer Hitches
- Article: Ram Trailer Tow Prep Package
- Shop: Trailer Hitch
- Shop: B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Search Results: gooseneck hitch
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Article: Gooseneck to 5th Wheel Adapters
- Shop: Trailer Wiring
- Search Results: air bags
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Shop: B&W Patriot 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 18,000 lbs
- Q&A: Determining The Correct Capacity Gen-Y 5th Wheel Pin Box For A Grand Design Momentum 397TH
- Video: Choosing the Best Fifth Wheel Hitch
- Search Results: b&w
- Search Results: gooseneck hitch ball
- Shop: B&W Ball and Safety Chain Kit for Ram Underbed Gooseneck Trailer Hitch
- Q&A: Recommended SumoSprings for a 5th Wheel Trailer w/ 8,000 lbs Axles
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Suspension Enhancement
- Search Results: safety chains
- Q&A: Which Hangers Should MORryde X-Factor Crossmembers Install On
- Shop: Brake Controller
- Article: How to Measure for Trailer Hitch Drop
- Video: Curt Custom Underbed OEM-Style Gooseneck Trailer Hitch Installation - 2019 Ram 2500