Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Dual-handle plastic RV shower valve has an angled base to prevents you from hitting your knuckles on the shower wall when you're turning the knobs. Vacuum breaker lets you add a handheld shower set (sold separately) to complete your shower setup.
Features:
Specs:
The vacuum breaker lets you attach a handheld shower set (sold separately) to make cleaning mud and sand off the kids, pets, and shower walls even easier. The vacuum breaker also has an anti-siphon device - a small air hole that drains water back out of the hose to prevent your dirty shower water from contaminating your clean water supply.
The angled base design of this shower valve tilts the knobs forward, which prevents you from hitting your knuckles on the wall when you're turning the valve on and off. Because of this, the valve is ideal for small or compact RV showers.
This valve lets you upgrade the shower valve in your RV or camper. Using the standard NPSM inlet shanks, slide the new valve and deck plate in place through the mounting holes. Then hand-tighten the included mounting nuts against the backside of the wall, and connect the hot and cold water lines.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today, we're taking a look at a four inch dual handle RV shower faucet with vacuum breaker. This unit replaces or upgrades the faucet in your RV's shower. It features the dual tea pot handles that make it easy to control the hot and cold water flow. Unit's made from a durable plastic construction. Right here is our vacuum breaker, which allows you to attach a handheld shower. That is sold separately and available at etrailer.com.
It also prevents the backflow contamination of your clean water supply.We're looking at a really nice brushed nickel finish. Gives it a really nice look. Complete lead-free design. Comes with the backing plate and the mounting nuts. The hot and cold water lines are separated on center by four inches, and they measure around an inch and a half long.
The base of this unit measures two and a half inches by about six and a quarter. And I did take a measurement from the back of the unit to the furthest out point of the handles, and got a measurement of around three and thirteen sixteenths inches. That's how far it sticks out from the installation surface.You'll also notice that it sits at an angle design. That really puts the handles a little bit outright, making them more accessible. The product's also made in the U.S.A.
That's going to do it for today's look at the four inch dual handle RV shower faucet with vacuum breaker.
Average Customer Rating: 4.7 out of 5 stars (563 Customer Reviews)
Dual-handle plastic RV shower valve has an angled base to prevents you from hitting your knuckles on the shower wall when you're turning the knobs. Vacuum breaker lets you add a handheld shower set (sold separately) to complete your shower setup.Used this to replace a single handle unit that we kept bumping by mistake. This unit installed very easily and works perfectly. Great product
Katrina D.
3/7/2024
Well that doesn't look like what you ordered. Lets get the right item sent out right away.
it looks and works great, matched the original exactly, hook-up was simple and easy, it was a replacement for my rv.
Excellent service. Website, merchandise and shipping were great. Product was installed by me in 10 minutes.
Kevin
8/13/2021
Great
Excellent replacement.
I received it in the mail before I expected it...and it took 5 to 10 minutes for my hubby to install...all around a great experience!!!
Not installed yet but looks great to me. will post pics when installed Thanks for the great service.
Just got it today so I haven't installed it yet but shipping was fast and it looks like exactly what I need.
Very nice finish, upgrade. Easy to inst all
We'd been looking for months for a replacement faucet for our year 2000 camper. After logging off all of my devices (to hopefully circumvent 'relevance'), I ran my search again and etrailer was one of the top results. Because the photos and video were precise, clear, taken from all angles and with detailed measurements, I was able to compare with my old faucet. I was so pleased that it was an exact fit!! I'll be using them again soon. We're still rehabbing this little camper and etrailer is now my go to spot for replacement parts.
Website was easy to use. For me the best part was the measurements of the faucets. It took the guess work out of knowing what would fit and match what we wanted. Installation went well. Love the look of it and it even gives us higher water pressure than our old one which was a nice surprise. Overall, I would definitely order from them again.
Trailer folks are just great! I chose a shipping method that wasn't an option for my address, and they called me right away to get it figured out. That's right, called me person to person. That is some awesome customer service right there! Oh yeah, the part was a perfect match too, took longer for the Teflon goop to dry than to install the fixture itself
I bought this because the faucet in our RV was very low and I wanted a faucet that had a higher outlet. It doesn’t go out very far into the sink, so, when washing your hands, water drips onto the counter top. I removed it and went back to the original faucet. I have since the found a swivel attachment that makes the water flow out further into the sink. I put this faucet back with the swivel and all should be fine.
It was an amazing product exact fit no cutting or pre-measuring, the best part is the new shower valve works exceptional,
Ps..
Please don't laugh...
Perfect replacement for the plain white fixture that came on the camper. 30 minute removal and install.
It's the exact replacement on a 2017 Keystone Springdale. Fairly easy replacement. Most difficult part is the small amount of room for access to the two water feed lines. But very possible with patience. Also Be prepared to replace the seals at the inlet water lines with new ones. It would be good on the etrailer web site for this faucet to have the seals listed to add to your order.
There are two strainer screens within the faucet at the water inlet lines. Keep those screens in mind because they are prone to fouling up and obstructing water flow. When that happens you have to remove the whole faucet again to clean them.
Anyway the faucet is the perfect replacement and works great
The faucet looked nice but it didn't fit on top of the new sink I ordered as well as the 1/2" stems were too short so I had to send it back. I did attempt to attach it to see if it did fit but between the thickness of the new sink and my counter top no way would it work.
This LaSalle Bristol RV Shower valve replaced original OEM part perfectly. Works great!
The one I received and installed today suffers from the same problem that others have encountered with this particular model: the hot water side has an issue that restricts the flow of water to the center pull-down spout. The cold water flow is just fine, and having reconnected the original faucet being replaced, both the hot and cold water flow just fine, and there is no issue with the hot water pressure. Unfortunately I will be returning this unit and asking for a refund.
Fit as it should without modifications. Handle turn is firm so as not to move during travel. Works well.
Not sure what I expected but way better than what came with the RV. I am new to RV'ing and you all made it so easy.
Order processed right away and came in a few days. I have found new friends.
1 year later with this in our camper. This faucet is still working well.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ray
1/3/2022
Still works perfectly! Great product