Dometic/Solera 18-Volt Universal RV Awning Conversion Kit

Question

Question:

I would like some information on your Solera 18v power awning conversion kit

asked by: James G

0

Expert Reply:

the Dometic/Solera Awning Conversion Kit is designed for campers that already have Dometic brand manual awnings and would like to convert them to electric/battery without having to perform interior in-the-wall wiring to install awning power arms.

You can choose the # LC434730 for the 69" in white or the # LC434729 for 69" in black. I have included a review and install video in the links below.

expert reply by: Les D

0

Answer 1

Yes, the Solera Manual Pull Style to Power Awning Conversion Kit #LC329250 simply adds a motor to your current system. This is compatible with your AandE awning and will utilize the old arms to operate.

view full answer...

Answer 2

You will continue to use your awning's current arms when using the conversion kit: - Solera Manual Pull Style to Power Awning Conversion Kit #LC329250

view full answer...

Answer 3

To convert your Dometic manual awning to a power unit, you can use the Solera 12V Conversion Kit in Black #LC434723 or White #LC434724 if you have a manual crank system. These Solera kits are compatible with Dometic (A&E) awnings like what you…

view full answer...

Answer 4

The Solera 18V Power RV Awning Conversion Kit - Universal - 69" Arms - White #LC434730 does use a lithium-ion battery. The Replacement is 18.5V Lithium-Ion Battery for Solera 18V Power RV Awning #LC387959 if ever needed. Lithium batteries work…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 12

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Dometic/Solera 18-Volt Universal RV Awning Conversion Kit

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching