Does Solera Manual Pull Style to Power Awning Conversion Use Old Awning Arms

Question

Question:

I have a 2000 Fleetwood Southwind with manual pull out awning and seen the Solera power Conversion kit my question is do I use my old arms that have slide out and lock arms or is new ones part of the kit?

asked by: Norman C

0

Expert Reply:

You will continue to use your awning's current arms when using the conversion kit:

- Solera Manual Pull Style to Power Awning Conversion Kit # LC329250

expert reply by: Kyle S

0

Answer 1

To convert your Dometic manual awning to a power unit, you can use the Solera 12V Conversion Kit in Black #LC434723 or White #LC434724 if you have a manual crank system. These Solera kits are compatible with Dometic (A&E) awnings like what…

view full answer...

Answer 2

The Solera Manual Pull Style to Power Awning Conversion Kit, White #LC329250 is a nice upgrade. I've attached some photos of the installation instructions for the parts exchange and the wiring of the unit.

view full answer...

Answer 3

I spoke with my contact at Lippert and she said that their manual to electric conversion kits like the Solera #LC329250 that you were looking at are only compatible with Solera manual systems so unfortunately it won't work with your…

view full answer...

Answer 4

If your awning is a carefree brand, select the Solera 12V Power RV Awning Conversion Kit, #LC434724. The Solera Manual Pull Style to Power Awning Conversion Kit, #LC329250 is to upgrade a Solera manual spring tension RV awning to a powered awning…

view full answer...

Answer 5

The Solera awning components like the Solera Manual Pull Style to Power Awning Conversion Kit #LC329250 that you referenced are designed to fit the standard brackets etc. found on campers. You would be able to easily reuse the same hardware on your…

view full answer...

Answer 6

If you need the replacement drive mechanism with covers, I suggest the Solera Pull Style Manual to Crank Style Manual Awning Upgrade Kit, White, #LC333410. If you want to upgrade from a manual pull to power awning, use #LC329250. If you want to…

view full answer...

Answer 7

You mentioned you have a manual pull down awning on your RV, and you can convert it, but you would not be able to use the conversion kit with arms, as they are not compatible with pull down styles, and the dryer vent would also interfere. What you…

view full answer...

Answer 8

You will need the Solera 12V Electric RV Awning Conversion Kit in Black #LC434723 or White #LC434724. These kits include new awning arms, along with caps to attach to your Dometic awning tube. You will need to run wiring to power the switch and…

view full answer...

Answer 9

I spoke with my contact at Lippert regarding the Solera 12V Power RV Awning Conversion Kit with 69" Arms #LC434724. She said that when deciding if a larger kit is needed it's best to go by the actual awning/fabric extension on your…

view full answer...

Answer 10

You can use this #LC329250 conversion kit if you have a pull style manual awning. These Solera Kits are compatible with your Dometic awnings and everything you need is included with the kit. I've provided a video for you to check out!

view full answer...

Answer 11

When it comes to converting your pull style awing to an electric awning The Solera Manual Pull Style to Power Awning Conversion Kit, White #LC329250 will work. This kit is easy to install and can be used on a short, flat or pitched Solera awning. I…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Does Solera Manual Pull Style to Power Awning Conversion Use Old Awning Arms

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching