What is Tongue Weight Range of Equal-i-zer Weight Distribution # EQ37060ET

Question

Question:

Am I reading this right the EQ37060ET covers weight ranges from 200 lbs to 600 lbs tw or do you have to buy bars for those weighs?

asked by: Mike B

0

Expert Reply:

You are correct the Equalizer weight distribution system part # EQ37060ET that you referenced has a tongue weight range of 200-600 lbs with the included spring bars. No additional spring bars would be needed.

expert reply by: Jameson C

0

Answer 1

To ensure that you are towing safely you will first of all want to make sure that you are towing within the limits of your trailer hitch as well as your 2008 Toyota Sienna. On page 361 of your owner's manual it states that your max trailer weight…

view full answer...

Answer 2

This is a really good question. So we've asked our weight distribution manufacturers this and they have told us that the weight of the WD system like the #EQ37060ET does not count against the tongue weight of the hitch or vehicle because it…

view full answer...

Answer 3

The tongue weight range of the Equal-i-zer kit part #EQ37060ET that you referenced would work great with the tongue weight you mentioned of your Forest River R Pod 191. This system has a range of 200 to 600 lbs and is widely considered to be the best…

view full answer...

Answer 4

The Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW #EQ37060ET you were looking at weighs in at 98lbs. Keep in mind that due to the role the weight distribution hitch plays, its weight will not get added to…

view full answer...

Answer 5

The Equal-i-zer Weight Distribution System w/ 4-Point Sway Control part #EQ37060ET will definitely help with sag and the bounce that you are experiencing while towing. This particular Equal-i-zer Weight Distribution System is designed for tongue…

view full answer...

Answer 6

I would recommend upgrading to the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW #EQ37060ET. This unit can handle tongue weight limits from 200-600 pounds, allows backing up and prevents sway.

view full answer...

Answer 7

The Equal-i-zer Weight Distribution System w/ 4-Point Sway Control part #EQ37060ET weighs in at around 99 lbs. in the box. When actually putting it in the hitch you will be lifting about 60 lbs. The brackets that attach to the trailer are about 20…

view full answer...

Answer 8

For you 22' Airstream Bambi I recommend the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW Item #EQ37060ET. This is not only a weight distribution system but it also has sway control and allows backing,…

view full answer...

Answer 9

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

According to RoadActive Suspension the spring rate for the standard kit #RAS3611-S is 2,400 lbs. For the heavy duty #RAS3611-SHD it is 3,600 lbs. The heavy duty #RAS3611-SLHD is the same but only designed to fit if you have factory top overload…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

What is Tongue Weight Range of Equal-i-zer Weight Distribution # EQ37060ET

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching