Location to Mount 7-Way Connector In Truck Bed for 5th Wheel
Question:
I have an 8ft box on my 2003 Chevy 2500HD, so far all the videos want to install it to the rear of the wheel well, if it comes with a 9ft harness would it be beneficial to install it forward of the wheel well? From a operational view which is the preferred? thanks
asked by: Steve M
Expert Reply:
Some model year trucks have a greater distance between the outer fender and the inside of the truck bed in the area directly behind the rear wheel well, which is typically why you see the trailer connector for the fifth wheel installed there.
You could install the connector forward of the wheel well if you wish, but if you do, I would recommend using a 90-degree plug like the Bargman # 50-97-410. A 90-degree plug needs less space behind the bed wall.
Keep in mind that you will need to pass the wiring harness from underneath up through the cavity between the fender and the bed, and depending on the make and model, there might be limited space available to feed the wiring harness through in front of the wheel well.
The trailer connector on your 5th wheel should be plenty long enough to allow you to install the plug behind the wheel well as shown in the videos, so I would just install it there.
Products Referenced in This Question
5th Wheel/Gooseneck 90-Degree Wiring Harness w/ 7-Pole Plug - GM, Ford, Ram, Toyota - 9' Long
- Custom Fit Vehicle Wiring
- Fifth Wheel and Gooseneck Wiring
- 9 Feet Long
- Custom Fit
- 7 Round - Blade
- Bargman
more information >
Product Page this Question was Asked From
Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole - Ford, GM, Dodge, Nissan w/ Factory Plug
- Custom Fit Vehicle Wiring
- Fifth Wheel and Gooseneck Wiring
- 7-1/2 Feet Long
- Custom Fit
- 7 Round - Blade
- Pollak
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Gen-Y Hitch 5th Wheel to Gooseneck Pin Box - Auto Latch - Lippert 1621/1621 HD - 21K - 3.5K TW
- Shop: Trailer Wiring
- Shop: Installation Bolt Kit for Gen-Y Hitch 5th Wheel Pin Boxes and 5th Wheel to Gooseneck Adapters
- Q&A: Will I Have Turning Clearance Issues Using The Gen-Y Gooseneck Pin Box On Short Bed Silverado 2500?
- Shop: Fifth Wheel Hitch
- Q&A: Recommended Gooseneck Pin Box for a 2024 Keystone Cougar 5th Wheel Trailer
- Video: Review of Gen-Y Hitch Fifth Wheel King Pin - Installation Hardware Kit - GY86FR
- Video: B and W Four Inch Offset Gooseneck Hitch Ball Review
- Video: B and W Hitch Ball - Gooseneck Hitch Ball - BWGNXA4085 Review
- Q&A: How To Determine Which Pin Box I Have and What Replacements Are Available
- Q&A: How to Determine the Pin Box Manufacturer and Model on a 5th Wheel Trailer
- Q&A: Can the Height of the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box Be Adjusted
- Q&A: Shim Kit to Adapt Gen-Y Hitch with 1621 Bolt Pattern to Lippert Mounting Wings with 1716 Pattern
- Q&A: Shim Kit Need For Gen-Y 5th Wheel To Gooseneck Adapter On a 2015 Raptor 412ts with Lippert 1621 HD
- Shop: Draw-Tite Safety Chain with Clevis Hook - 26,400 lbs - 41-1/2" - Qty 1
- Shop: 1/4" Filler Shims for Gen-Y Hitch Executive Fifth Wheel Pin Boxes
- Shop: Gen-Y Hitch 5th Wheel to Gooseneck Pin Box - Auto Latch - Lippert Rhino - 21K GTW - 3.5K TW
- Shop: Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box - Fabex/M&M 665 - 30K GTW - 4.5K TW
- Shop: 4" Offset Ball for B&W Turnoverball Gooseneck Trailer Hitch for Toyota Tundra
- Search Results: bed rails
- Video: Curt Custom Fifth Wheel Kit Installation - 2022 GMC Sierra 2500
- Search Results: military discount
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Shop: Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Gooseneck Hitch
- Video: Demco 5th Wheel/Gooseneck Wiring Harness Installation - 2016 Ford F-250 Super Duty
- Search Results: in bed wiring harness
- Video: Review of Demco Fifth Wheel - DM6171
- Search Results: 5th wheel bed rails
on Custom Fit Vehicle Wiring
